help for newbie

[madcobra2006uk]

hi i am very new to this game but keen to learn i have just bought my first heli it is second hand and it is a raptor 50 v 2 it came with no crystals n t.x so i bought a jr x.347 powerd it up the servos jutterd on power up but nothing wen i try with t.x i used the crystals from my plane 35mhz but no joy the only thing that happens is the gyro flashes its all futaba servos n reciver so if any 1 can help it will b a good send as im unsure if i have bought a broken item or its just me not doing sumthing that i should as like i say i am a newbie thanks ops:

[Disc]

Hi
Your likly problem is Futaba Reciever and JR Transmitter...

they dont like each other at all. If you have a JR Tranny then
you should buy and use a JR Reciever and JR crystals.

Futaba Tranny use a reciever that works with Futaba and crystals.

Not a likly to be broken just a total mix up on crystals and rx/tx
gear.

Also find another heli flyer in the area for some set up advice etc....

[Sao]

Yup try to get a JR Receiver (Rx) to use with the Transmitter (Tx)

Also make sure that the Tx is set to PPM mode and not PCM mode, assuming the Rx is a std FM Rx and not a PCM one.

And check to make sure that you have the correct type of xtals in both, Futaba use Dual conversion Xtals in their PCM receivers whereas JR just use std single conversion Xtals

[Ade_Law]

we need a few more details

What receiver are you using.
what reciever were you using in the plane
what make xtals are you using and does the rx one have a red tag.
is the tx transmitting in PPM or PCM mode.

Ade