walkera 4ch rc heli transmitter

[dutch]

could anyone give me any instructions on what all the switches and buttons on the transmitter are for as there didn't seem to be any instructions about the transmitter
any help would be gratefully received
TA !

[mackem54]

hi there,
i am assuming that the heli is fixed pitch if it only has 4 channels,
firstly if the control with the ratchet is on the lhs the tx is mode 2 if not mode 1,the control with the ratchet is up and down(throttle) left and right is the control for the tail rotor to turn the nose left or right,
the other stick is for left and right airleron(cyclic)this makes the heli bank left and right,and up and down makes the helis nose raise or lower,
the trims under and alongside the sticks are for small adjustments to get the heli in trim,
most people in uk fly mode 2,
i cant help you with the buttons because i dont know what tx you have.
i am no expert but i hope this helps

[dutch]

the help you gave me is great but there are also 2 switches on the face but at the top of the tx with a small button next to the right one any ideas thankfully received TA !

[bandicoot]

Having just got the dragonfly for christmas (would like a biger heli but the wife didnt like the cost) i can confirm they do diddly squat.. nothing ...nill...zip but they do look fancy 8O

[havina]

Dragonfly switches

The switches and button have a very special function :- they are there to fill in some holes! and possibly make the TX look more advance than it really is.
They have no wiring attached to them at all.