Ok I've had a read of various posts and slowly picking up things as I go along. I've ordered my first Heli (Can't wait for it to come) so I'm looking for learning hints and tips! I've gone for a Esky Belt CP after reading several reviews (last one been Rotorworld) recomending it as a good starter Heli. As I said I'm a complete beginer when it comes to Heli's had plenty of R/C cars leave the ground but never for a period longer than a few seconds!! lol Also what in the way of tools and bits and pieces should I be looking to get?
Announcement
Collapse
No announcement yet.
Hints, Tips, General Usefulness For a Newbie Here Please!!
Collapse
X
-
makes sure you get yourself some training undercarige legs for it! thats probably the best adivce i can give
also if you havn't got a sim already, have a look at phoenix sim. yes its queit expensive but it is a VERY worth while investment and will save you a bucket in the long run!
good luck
cheers,Tom
---------------------------------------------
---T-rex 600n---Knight 3D---T-rex 450 se v2---
---------------------------------------------
-
Well luckily training undercariage are included with the Heli! Spare set of blades and a usb cable to connect my Tx to the PC. I'll get Pheonix when I've got some more pennys!lol In the meantime I'll give the Esky sim a whirl to get me going!
Comment
-
Hi Richie
I'll keep it short, I'll tell you now the first time you take that belt CP out spool her up and lift off your going to total it, or worse your end up hurting someone else or yourself.
The learning needed to take her up takes loads of Sim practice even then it doesn't completely prepare you for CCP flight.
Buy Phoenix and study flying, if this is the route your going to take, if not just make sure no ones around you when you take that first flight of death for that new heli coming our way mate.sigpicWayne AKA OB1
Inherit the Wind - Wilton Felder 1980, Smooth Jazz-Funkin' & Flyin' in the Fens
Blade CX2 / Trex 250SE / Trex 450 SE V1 / Trex 500esp / Trex 600 Nitro Pro / Raptor 30 V2 / DX6i / DX7 / Phoenix / Ripmax twin Dock PSU / Cellpro 10S & 4S / Imax B6 x2.
Prankster Nitro / Delta Push Prop / Swift 2 Flying Wing x3 / Swift 2 (Night Flyer LED Lit) / Swift Maxi Wing / Squall 4S/ HZ Ember / Wot 4. (all 2.4ghz)
Plus 3 Eddie Gold Stars, yay!
Trex 450XL - Destroyed due to complete power failure at height.
Joint second best sites on the Web:-
http://www.vinylmorpher.co.uk/
http://www.soulandfunkmusic.com/
Comment
-
Hey if you total it in five seconds doesn't concern me in the slightest, you wanted advise, so I was honest. Your taking a very expensive route and one that'll possibly put you off.
Go ahead, but don't say we didn't tell you first!sigpicWayne AKA OB1
Inherit the Wind - Wilton Felder 1980, Smooth Jazz-Funkin' & Flyin' in the Fens
Blade CX2 / Trex 250SE / Trex 450 SE V1 / Trex 500esp / Trex 600 Nitro Pro / Raptor 30 V2 / DX6i / DX7 / Phoenix / Ripmax twin Dock PSU / Cellpro 10S & 4S / Imax B6 x2.
Prankster Nitro / Delta Push Prop / Swift 2 Flying Wing x3 / Swift 2 (Night Flyer LED Lit) / Swift Maxi Wing / Squall 4S/ HZ Ember / Wot 4. (all 2.4ghz)
Plus 3 Eddie Gold Stars, yay!
Trex 450XL - Destroyed due to complete power failure at height.
Joint second best sites on the Web:-
http://www.vinylmorpher.co.uk/
http://www.soulandfunkmusic.com/
Comment
-
Well my Heli arrived!! Had a go in the garden with the training gear on! Managed to hold her in a short hover between slowly hopping her around the lawn!! lol Enjoyed my first go looking forward to practising some more! Taking it to a local model shop for a set up as I think it may need the gyro servo linkages adjusting. Would have a crack but I don't know enough about it's inner workings yet so i'll well alone!! lol Anyhow saving like mad for pheonix! Any folk on from around my way? (Yorkish!) Be nice to have some local to swap tips and tails of woe! lol
Comment
-
good to here your succeeding and it sounds like your taking the right steps (baby ones!)
keep saving for phoenix! once you've got it you'll wonder why you didnt get it ages ago!, it will benefit you loads!
cheerss,Tom
---------------------------------------------
---T-rex 600n---Knight 3D---T-rex 450 se v2---
---------------------------------------------
Comment
-
Good on yah , keep the small hops on the go and you will soon find your in a steady hover at a meter or so . GOOD LUCKOriginally posted by Rich79 View PostWell my Heli arrived!! Had a go in the garden with the training gear on! Managed to hold her in a short hover between slowly hopping her around the lawn!! lol Enjoyed my first go looking forward to practising some more! Taking it to a local model shop for a set up as I think it may need the gyro servo linkages adjusting. Would have a crack but I don't know enough about it's inner workings yet so i'll well alone!! lol Anyhow saving like mad for pheonix! Any folk on from around my way? (Yorkish!) Be nice to have some local to swap tips and tails of woe! lolREGARDS JAMIE
Knight 50,50 hiper,hatori pipe,gy401+9254,ttcarbon blades futaba ff7fast 2.4 ghz set up with 3152 digi s all round and a rev loc 10
450 rex standard setup
Phoenix sim...
Plus two gliders and one pits special biplane
Comment
-
It's good you had a little hover but do make sure it stays just that until you iron out some Sim time on Phoenix.
I was being a little hard on you before as it happens all the time when the urge to see her hovering ends up costing dearly, so when Phoenix arrives cram in the practice bud', it'll save you so many repairs later on for sure.
Best of luck.
sigpicWayne AKA OB1
Inherit the Wind - Wilton Felder 1980, Smooth Jazz-Funkin' & Flyin' in the Fens
Blade CX2 / Trex 250SE / Trex 450 SE V1 / Trex 500esp / Trex 600 Nitro Pro / Raptor 30 V2 / DX6i / DX7 / Phoenix / Ripmax twin Dock PSU / Cellpro 10S & 4S / Imax B6 x2.
Prankster Nitro / Delta Push Prop / Swift 2 Flying Wing x3 / Swift 2 (Night Flyer LED Lit) / Swift Maxi Wing / Squall 4S/ HZ Ember / Wot 4. (all 2.4ghz)
Plus 3 Eddie Gold Stars, yay!
Trex 450XL - Destroyed due to complete power failure at height.
Joint second best sites on the Web:-
http://www.vinylmorpher.co.uk/
http://www.soulandfunkmusic.com/
Comment
-
Cheers lads! I can see why people get to carried away though! I was grinning like a kid at xmas when I had her hovering!! When I get her back I'll bob down the field as I was running out of "hopping" space! Pheonix looks excellent so I guess something will be going on ebay to pay for it! lol
Comment
-
Last edited by mattydred; 24-05-2008, 12:16 PM.
cheers
matty
Spektrum DX7s
DJI F450 naza/gps Trex 500
http://www.facebook.com/groups/186596271481434/
Comment
-
alright rich, i'm new to the heli flying myself (4weeks), and went you're way and started flying before i got a sim, and yup i managed the few hops and a bit of a hover, before i ditched it, but seriousley speaking i wish i had listened to the advice from here, just a few hours on the sim has saved me loads, i went for the blade400 as my first heli, and i'm well happy with it, now i'm looking at getting a rappy 50 to build from scratch, just to get the experience in knowing how a heli is put together and how the setup works, another top tip is join a club, its a total library of information with people chomping at the bit to help and advise you.
cheer C
when once you have tasted flight, you will walk the earth with eyes turned skyward, for there you have been and there you will always long to return. (leonardo de'vinci)
Comment
-
Cheers Matty! What are they like to upgrade/repair? Easy or rather fiddly? I know at some point I'll end doing both!lol
Alright Cyrus! I'll be getting a sim as soon as me cash allows it! Sadly the Esky version doesn't work with Vista 64 without serious patching! Leaves me with pheonix which is deffinatly the best but it's gonna cost me £80.00! (Need an adapter for my radio) So for the moment I'll be doing lots of hopping! lol Just left me Belt CP at the model shop for a set up! Back tuesday!!
Comment


Comment