Beast X. WOW.!!!

[Sieze2]

To increase the roll rate on mine I simply left it in expert mode and increased the airleron and elevator end points? Is that correct? Do I need to increase the pitch endpoint as well? Any idea how much expo it is using on expert mode?

[pgkevet]

Good report there pgk. I'm already sold on the unit, I loved the 3G 2.1 update but the tail was still awful. Sounds as if this thing is what I have been looking for.

I went back to a flybar heli pgk and it was awful, I had to actually correct during tick tocks, loops and rolls. I certainly got used to the 3g helping me out and I don't like flybars now.

The tail held solid in forward flight for me with same gain as the quark had had - including aileron ticks.. the canopy incident happened before i got to trying my luck with tail slides etc..but my backwards flying is non-existent (apart from tail in)

[pgkevet]

now that is amazing. You live and learn...
-------
For faster roll rate, set it to "controlled by radio". This removes expo on the unit, so dial it in on the radio if you like to have expol.
On the DX7 I have to increase endpoints on aileron and elevator quite a bit, but now I think the 450 approaches the unstabilized roll rate. Which is pretty darn fast.

I've got $5 servos on my 450 pro clone they're solid but the horns don't last/can;t be bought seperately
https://www.hobbycity.com/hobbycity/...3.4g_/_0.10sec

I'll get to playing with radio gains and PC programming in due course

[est1976]

anyone think its worth it on a trex 250? I see FL has a microheli FBL head for £28

[choppaholic]

download the english mnaula from beastx..it does list the 65mg's in the appendix for setups

brilliant, any one manage to track their item on DHL from Freakware they sent me mail in German, which deosn't make sense even after translation

[Tim Procter]

Uploaded the manual HERE if anyone wants the English version.

Right Click. Save as.

[Jamin_00]

Nice one Tim bit you can download it from beastx.com also

Where I got mine from.



Got that vid yet!!!

[Tim Procter]

Nice one Tim bit you can download it from beastx.com also.

Where do you think I got this from Ben..

DOH.!!!!




Just trying to help or didnt you see that.

[Jamin_00]

Alright chill out bean sprout

Well helped

[pgkevet]

brilliant, any one manage to track their item on DHL from Freakware they sent me mail in German, which deosn't make sense even after translation

It only took two days..but the tracking number was on their email..top right. Bags I the haribo!

[gazelle341]

brilliant, any one manage to track their item on DHL from Freakware they sent me mail in German, which deosn't make sense even after translation

On my german email there was a link to DHL - Paket | Express | Logistik.
Also on my email was a 12 digit Sendungsnummer!
Copy and paste this number into the Sendungsnummer box half way down the LH side.
I got good info about which depot it was in, air transfers etc

[Andy from Sandy]

If the BeastX works the same as V-Bar then here is a good reason for getting the satellite type hook up to work with a comparison of the different systems.

Standard RX
Each function has a seperate output on the RX. The RX decodes the complete recieved digital signal and codes a PWM signal for each function. So each function needs a seperate signal lead to our VStabi. The function signals can be given out with up tp 7ms (Futaba HS) pulse rate for every single signal. The signals are analog PWM signals. Every analog signal has to be measured in iths pulse length by VStabi to get at least the stick postion of the TX. (Available for every Standard RX in the world)

Single line RX
A RX with only 1 lead for signal output. The RX decodes the complete recieved digital signal and codes a PWM signal for each function. Now they will be appended to one complete analog PWM signal. The signals are "all in a row" as on a rc-teaching system. So one complete signal row contents every analog PWM signal of every function and a sync signal also. That is the reason why this data mangement will always be slower than standart above. Every analog signal has to be measured in iths pulse length by VStabi to get at least the stick postion of the TX. Also VStabi has to watch for the sync to start with the right signal decoding ... (Available for e.g. Jeti and Futaba)

Satellite RX
A fully digital data protocoll will be sent out from this RX to VStabi. No PWM coding/decoding necessary, the signal can be used immediately without any decoding in our unit. Much faster than the 2 signal managements above. (Available for Spektrum Satellite)

[Tim Procter]

Been posted on another thread but worth a glimse here I reckon for ease of use.


[ame=http://www.youtube.com/watch?v=St8Mi6emNnY]YouTube - BeastX Rotor-live-HD[/ame]

[Jamin_00]

Makes you wonder what all the noise was that they can't be used on big helis???

Even he said 250-700 size

[fishface]

Tim

Out of interest, please could you ley us know what blades, tail blades and servos you are using on your 700 with the Beast?

Thanks

Steve