Gpro Throuble Shooting.

[tourerjim]

Cheers for that guys will have a go at it tomoz

Once you've configured your setup its a good idea to start your flights in 'Beginners Mode' even in this setting it gives you the ability to 3D which mine is setup to & then ive done some parameter adjustments as ive got to understand them.

[mr magoo]

well i manager to get it all set up and know i have the tail bounce back did have a look at the tail set up and the servo horn is not at 90 as this was the only way i could get it set up when i used the 3gx, still had the bounce then. do you guy have yours at 90, as dome how i think the tail rod could be to long. i left the tail rod length the same when i had the 3gx on. can someone measure there rod

[tourerjim]

Ive had same on all my heli's with Gpro, way i done in the end is to take off in rate mode & if tail drifts adjust until it holds then in gpro parameters set heli to 'beginner' the adjust tail parameters if needed.
You might find you will get the horn to 90 this way.