3G 2.1 tail issues Coolice Help!!

[MarkG_R1]

No not yet I'm working nights this week and haven't got another servo horn to try, need to find one to fit a ds520 with a shorter throw than 10mm

Check your spares please fella's

[tourerjim]

Can ya not drill a hole to move it in

[MarkG_R1]

Yeah I could, but I'd rather just try another horn

[BIGUS NIKUS]

could be your tail servo? If you've not had the problem before it could have developed a glitch, its not that unusual for servo's to suddenly start playing up?

[MarkG_R1]

I'm pretty confident it's not the servo, it was new in February and hasn't done much work, also was performing fine with the gp750 so I'm sure the servo is fine, I'll get a shorter horn and setup again and hopefully that'll be that

[MarkG_R1]

Right i've Drilled another hole in the servo horn at about 7.5mm from centre and set the gyro travel up again

It now handles 75% on the Tx ok but still some wobbles after a harsh turn, i've upped the delay to 70 and this seems to help

would it be ok to max the delay and try again?

[tourerjim]

Right i've Drilled another hole in the servo horn at about 7.5mm from centre and set the gyro travel up again

It now handles 75% on the Tx ok but still some wobbles after a harsh turn, i've upped the delay to 70 and this seems to help

would it be ok to max the delay and try again?

When you say wobbles do you mean it wags, your be fine to max delay or at least give it a go to see if it cures it.

[MarkG_R1]

When you say wobbles do you mean it wags, your be fine to max delay or at least give it a go to see if it cures it.

Sorry i meant wags after a sharp input, i'll try max delay and see what happens

[MarkG_R1]

Again better but still there

Howabout turning the total gain down a bit ??

[tourerjim]

Again better but still there

Howabout turning the total gain down a bit ??

It's the gain that controls wag, did you put the gain down to 50% & try it

[MarkG_R1]

It's the gain that controls wag, did you put the gain down to 50% & try it

You mean on the pc program? No i didn't, Will try that

[MarkG_R1]

It's the gain that controls wag, did you put the gain down to 50% & try it

Definitely better I can go up to 80% on the Tx now, Maybe i'll go down a bit more on the pc program

Thanks for all your help guys

[tourerjim]

It's the gain that controls wag, did you put the gain down to 50% & try it

What you need to do is default the pc parameter then fly heli & adjust the gain on tx so the tail wag is just in control then fine tune with parameter.

[MarkG_R1]

Ok I defaulted the settings when I started again with the shorter servo horn and so far I've turned total gain down to 40% and lock gain down to 50% on the parameters

This allows me to run up to 85% on the tx with no wag

I flew 4 packs this evening and I'm happy with how it flies now

[tourerjim]

Ok I defaulted the settings when I started again with the shorter servo horn and so far I've turned total gain down to 40% and lock gain down to 50% on the parameters

This allows me to run up to 85% on the tx with no wag

I flew 4 packs this evening and I'm happy with how it flies now

Glad your all sorted