Announcement

Collapse
No announcement yet.

Must be mad lol

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #76
    Looking good Don,

    hope it flies how you like it.
    Lann-ding...

    Goblin 700/ Logo 700/600 /700X/ Synergy 516/ Diabolo 550
    ------------------------------------------------------------------------

    SouthHantsHelis

    sigpic

    Comment


    • #77
      Originally posted by PorscheBoy View Post
      Well done mate, never doubted you could do it. Don't think the 700 will be ready to maiden with you though.
      Get on with it Paul!



      sigpic X 2











      Comment


      • #78
        Originally posted by panosg View Post
        Get on with it Paul!
        Hello Panos, I am, I am, started on the tail now as the frame etc is now pretty complete (need main gears installed, that's all). Its the electrics that are getting me worried, but I know a man... (Mattie?).
        Paul


        Blade 130x - Smallest heli, biggest PITA.
        Syma SO33G - Co-Axial ('nuff said, sorry)
        Align Trex 550e DFC v3 - Mini vBar v5.3.4 PRO - Kontronik Jive 100+ LV - 5000mAh 6S (Murderous devil spawned attack drone!) Broken....again!!
        Align Trex 700e HV DFC Super Combo - Mini vBar v5.3.4 PRO - Castle ICE2 120HV v3.56.17
        - Gryphon Quasar BEC - TM1000 Telemetry - 5000mAh 12S
        DX7s .
        PL8 v3.31
        RF 7 & Exp' Pack 8. v7.00.036.
        Phoenix v5.0.p

        Porscheboy on Google+ . Porscheboy on YouTool (Only if you're really bored ).

        South Hants Helis (SHH) on Facebook
        Proud to have been there since the start.


        Artificial intelligence is no match for natural stupidity.

        Comment


        • #79
          Well I went to test fly today after work and connected the pack and went thru a pre flight. The swash was compensating as it should but the tail gyro was not ! It worked on the bench ? The tail servo is fine and commands work but on moving the heli the gyro is not responding ??

          Running dx8 and have set the tail percentages at 60 65 and 70 but none work it's prolly something very simple lol
          sigpic


          Rave ENV Nitro
          New Logo 550
          Synergy N5c
          TSA 700E night flier
          I use VBar control because it's feckin awesome I use NEO rescue when I remember to
          5 x EGS thingys and a Platinum star doo dah

          Comment


          • #80
            Sussed it, had the gyro channel set to Gear instead of Aux2
            sigpic


            Rave ENV Nitro
            New Logo 550
            Synergy N5c
            TSA 700E night flier
            I use VBar control because it's feckin awesome I use NEO rescue when I remember to
            5 x EGS thingys and a Platinum star doo dah

            Comment


            • #81
              Originally posted by milly0812 View Post
              Sussed it, had the gyro channel set to Gear instead of Aux2

              Santander Factory Team

              Proud wearer of 5 x EGS

              Comment


              • #82
                Flew a couple of packs on the 3gx after work today. Felt totally disconnected from it, it popped into the hover no problem at all. The tail had an intermittent drift. One minute it held solid then If I did a piro it would stop nicely then start to creep round.
                It did flip nicely but the cyclic felt notchy and robotic and tbh I had to fight with it throughout the whole 2 flights.
                I honestly didn't expect any different from the first flights but I don't have the time or patience to tweak it out and besides .......Xygax has fixed my crash damaged vbar woohoo so guess what's happening on Monday lol
                sigpic


                Rave ENV Nitro
                New Logo 550
                Synergy N5c
                TSA 700E night flier
                I use VBar control because it's feckin awesome I use NEO rescue when I remember to
                5 x EGS thingys and a Platinum star doo dah

                Comment


                • #83
                  Originally posted by milly0812 View Post
                  Flew a couple of packs on the 3gx after work today. Felt totally disconnected from it, it popped into the hover no problem at all. The tail had an intermittent drift. One minute it held solid then If I did a piro it would stop nicely then start to creep round.
                  It did flip nicely but the cyclic felt notchy and robotic and tbh I had to fight with it throughout the whole 2 flights.
                  I honestly didn't expect any different from the first flights but I don't have the time or patience to tweak it out and besides .......Xygax has fixed my crash damaged vbar woohoo so guess what's happening on Monday lol
                  3gx is getting ditched! Vbar aloco
                  Santander Factory Team

                  Proud wearer of 5 x EGS

                  Comment


                  • #84
                    Originally posted by milly0812 View Post
                    Flew a couple of packs on the 3gx after work today. Felt totally disconnected from it, it popped into the hover no problem at all. The tail had an intermittent drift. One minute it held solid then If I did a piro it would stop nicely then start to creep round.
                    It did flip nicely but the cyclic felt notchy and robotic and tbh I had to fight with it throughout the whole 2 flights.
                    I honestly didn't expect any different from the first flights but I don't have the time or patience to tweak it out and besides .......Xygax has fixed my crash damaged vbar woohoo so guess what's happening on Monday lol

                    monday
                    a flybar will be fitted to save all the hassle of sorting out a fbl unit
                    Hirobo Turbulence D3
                    a bunch of bls servo's and a 701 gyro
                    Powered by an OS91 hz and a MP2
                    Winner of the LHC Scale Cup 2011

                    1/4 scale Vario Bell 47 G3
                    1/3 scale Vario R22
                    2012 LHC Scale Cup Judge
                    member of save the flybar foundation
                    www.alcesterhelicopterclub.bmfa.org
                    sigpic

                    Comment


                    • #85
                      Thank god for that Don, was getting worried for you!
                      George

                      sigpic
                      4x E
                      GS



                      Comment


                      • #86
                        Flew a couple of packs on the 3gx after work today. Felt totally disconnected from it, it popped into the hover no problem at all. The tail had an intermittent drift. One minute it held solid then If I did a piro it would stop nicely then start to creep round.
                        It did flip nicely but the cyclic felt notchy and robotic and tbh I had to fight with it throughout the whole 2 flights.
                        could of saved a bit of time typing there with just 2 words mate.

                        It's shit.

                        T- rex 600n V-bar
                        Logo 550sx V-bar
                        Logo 600sx V-bar
                        Logo 600sx V-bar night flyer

                        VBControl, but not the gay white version as i'm simply not gay enough to pull it off!

                        Comment


                        • #87
                          Just fitted a 3GX to a newly built 450L. I'm spending some time getting my head around the advanced parameters as I want to get the best out of it. Box settings aren't ideal (a bit slow and mushy for me but a good starting point) and the laptop is definitely required to get the best out of this unit (again, for me). Just for comparison I also fitted a mini V-Bar for half dozen flights (which behaved as expected).

                          The first few flights I've had with the 3GX are encouraging. I upped the aileron and elevator rates to 80% giving a feel on the cyclics very close to the previously fitted v-bar. Cyclics felt much more direct and the heli perfectly responsive and predictable. The tail, however, is taking some work but it's getting there (using laptop to adjust parameters). I'll come back with my thoughts and settings once I'm happy.
                          Last edited by t-rex pedro; 21-10-2013, 10:13 AM.
                          Pete



                          Comment


                          • #88
                            I'm going to get alot of stick for this but I want to know why everyone always compares things to a V Bar? As if its the best you can get, over the last year I have been lucky enough to have a play with a few people machines and setups and for me the V bar has always flown fake and generally soft (not snappy feeling in aggressive 3D) Although it can be made to look aggressive it does not have that direct feel that I was after. The other big problem that some of you may have noticed is that most of the V bars I have watched have a really annoying tail bounce on hard stops, its just like alittle twitch. Of cause for most people out there its not a problem, if you are just hovering and doing some basic 3D then really any gyro will work for you, I set up an old 3G unit while in corfu the other week and it flew quite nice.

                            Anyway I only made this post because I always sit here reading these posts wondering why everyone raves about it so much? This may have been the wrong place to post this because I am far from trying to suggest the 3GX is the best unit because it plainly is not! Far from it although I have to say you can get one flying fairly well which I can vouch for because I have done it before but granted I still sold it in the end and put a Beast X on it! :P

                            In my opinion almost all FBL units can be made to fly very well most of it is in the setup of your heli and setup of the unit, so why spend huge amounts on a V Bar when a Beastx or now also by the looks of things the Spartan are as good if not better!

                            Right let my slating begin!
                            Trex 700E DFC Beast X, Trex 550 DFC Beast X, Msh Protos Beast X, Blade 130x

                            Flying for: Rcheliguru, Robbe UK and Spin Blades

                            Comment


                            • #89
                              Originally posted by Benjbrit123 View Post
                              I'm going to get alot of stick for this but I want to know why everyone always compares things to a V Bar? As if its the best you can get
                              Correct, it is! Next!

                              Comment


                              • #90
                                Originally posted by Supa Koopa View Post
                                Correct, it is! Next!
                                And which others have you tried
                                Trex 700E DFC Beast X, Trex 550 DFC Beast X, Msh Protos Beast X, Blade 130x

                                Flying for: Rcheliguru, Robbe UK and Spin Blades

                                Comment

                                Working...
                                X