hi,can you use end points to help get swash level? with the 3GX?
Announcement
Collapse
No announcement yet.
can you use end points to help get swash level? with the 3GX?
Collapse
X
-
Hey Buddy.Originally posted by JAG1 View Posthi,can you use end points to help get swash level? with the 3GX?
No, you cannot use end points as you would for old flybarred setups.
With the 3GX, level the swashplate at mid stick with as least sub trim as you possibly can. Any slight changes in swashplate levelness at the extreme's does not seem to matter in flight.
.Ian Contessa
Robbe SchluterUK / Midland Helicopters / Align




Coolice Power Supplies
Coolice Custom Built Charge Case's
-
Hey.Originally posted by JAG1 View Posthi,why not? my swash is a bit out at low stick so I was gonna use end points.
It's just the way the 3GX works, unlike the Vbar it does not have individual settings to level the swash at the extremes.
If you do use the travel limits to do so all the internal mixing will be wrong within the 3GX, as it needs to see 100% in either direction and you could be in for an exciting first flight.
.Ian Contessa
Robbe SchluterUK / Midland Helicopters / Align




Coolice Power Supplies
Coolice Custom Built Charge Case's
Comment
-
hi,so you are saying being a bit out low or high is fine? I did use end points when I built my 500 and it was perfect.but I will do as you say,as I don't want to crash my new 550!Align 700L TOP Spartan Vortex
Align 550DFC Spartan vortex
Blade 180CFX
Nano CPX
Futaba 8FG
Comment
-
Hey.Originally posted by JAG1 View Posthi,so you are saying being a bit out low or high is fine? I did use end points when I built my 500 and it was perfect.but I will do as you say,as I don't want to crash my new 550!
Yes, a discrepancy at top and bottom stick is not what we would call ideal but the 3GX does compensate for it if need be. This is why I recommend to use minimal sub trim, easier said than done with single arm servo horns, but I have found the less sub trim the better the swashplate was at the extremes. This is also dependant on how well you align your servo arms at the mid stick position, with the control ball in the centre of it's arc of movement.
.Ian Contessa
Robbe SchluterUK / Midland Helicopters / Align




Coolice Power Supplies
Coolice Custom Built Charge Case's
Comment
-
hi,well I have it a bit better now.aileron and pitch are about 2mm to low at low stick from swash leveler,perfect at mid and high.elevator perfect.will this be better?Align 700L TOP Spartan Vortex
Align 550DFC Spartan vortex
Blade 180CFX
Nano CPX
Futaba 8FG
Comment
-
Evening Mate.Originally posted by JAG1 View Posthi,well I have it a bit better now.aileron and pitch are about 2mm to low at low stick from swash leveler,perfect at mid and high.elevator perfect.will this be better?
Yeah that sounds much better. It takes a lot of fiddling sometimes to get as good as you can, but pays off in the end with the flying.
.Ian Contessa
Robbe SchluterUK / Midland Helicopters / Align




Coolice Power Supplies
Coolice Custom Built Charge Case's
Comment


Comment