Need more cyclic response.

[SamS]

I would like more cyclic response on my 500 as it seems a bit too slow for me. I am using the AR7200BX (As most of you know).

How can I up the cyclic response by one setting ??


Thanks

[SamS]

I have looked in the manual btw, but found it a tad confusing (considering its 10pm )

[panosg]

Sam I think the pots on top of the bx are the ones you need to adjust mate. Have a read at the manual.

[Geek]

Need more cyclic response.

Are you using Tx mode?

[panosg]

i have looked in the manual btw, but found it a tad confusing (considering its 10pm )

lol....

[SamS]

Yeahh Paul, Me and James (well, just James) set it up in TX mode. But I remember him setting the cyclic response on the bx

[Geek]

Need more cyclic response.


Transmitter mode feels more a live

[Geek]

Need more cyclic response.

Do you want faster roll?

[SamS]

Yeah Just faster cyclic really, not faster pitch, the pitch is fine, I just want it too be a lot more responsive

[MarkG_R1]

Need more cyclic response.

I found myself wanting more cyclic response with mine too and fiddled about going up one setting at a time and flying it

Save yourself the trouble mate go straight to Transmitter on the settings and up your ATV's to suit you

I'm on 110 on my 450 I think

[SamS]

So yeah, faster roll rate on ele and aile

[Geek]

Need more cyclic response.

Like Mark said in Tx mode up end point on servo travel

[SamS]

So increase the servo travel ?

[Dan22]

Had mine set to sport mode, but now got it on transmitter mode as i can fine tune dual rates and expo to my liking.
To get in to the parmeter menu, hold down the setup button until it flashes, then press again to move down to option B, move rudder stick until the light colour matches the option you require on the colour chart. so for transmitter option it's a solid blue light.

Dan.

[MarkG_R1]

Need more cyclic response.

The limits of your servo travel are all determined by the swash settings where you set the endpoints to avoid binding

Set the travel adjustment on the tx to 110% BOTH WAYS! On ele and aileron and give it a go