Announcement

Collapse
No announcement yet.

LHS Fuel Availabilty

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • LHS Fuel Availabilty

    Hi guys

    I wanna go buy some fuel today and the stock at my LHSes is somewhat limited. The nearest two to me only seem to have:

    • Blue Thunder (at varying %ages)
    • Bekra (at varying %ages)
    • Optifuel car fuel (at 25 & 30%)
    • Byron race fuel (at varying %ages)

    Are any of these any good? Or should I drive further afield and see if I can find something more suitable?
    Last edited by Mart61; 27-06-2009, 09:43 AM.
    Martin

    Most of the Aligns, fair few Spektrum bits, bunch of Align & HiTec servos, OBE, VD & Bar.


  • #2
    Why not try mail order, min 4 gallons like Rapicon or the like then you can always use the same brand, I am sure once you start flying your nitro you will go through it quickly.
    David
    Kyosho Concept 30 still going just
    T Rex 450 V1 GY401
    T Rex 450 Pro FBL DFC AR7200BX
    T Rex 600n compass FBL head Vortex N
    Srimok 90N FBL VX1

    A EGS for me shucks X 2 to treasure.







    Comment


    • #3
      Originally posted by Mart61 View Post
      Hi guys

      I wanna go buy some fule today
      Fule..

      Get yourself some Magnum/Optifuel or Rapicon bought Martin.

      I would say 20% will be plenty good enough at your stage until you start ripping the thing to bits.

      Comment


      • #4
        Thanks guys. So I guess what you're saying is don't buy the stuff from my LHS then eh?

        I'll spread the net a little further as I want to buy some today if I can.
        Martin

        Most of the Aligns, fair few Spektrum bits, bunch of Align & HiTec servos, OBE, VD & Bar.

        Comment


        • #5
          Originally posted by Mart61 View Post
          Thanks guys. So I guess what you're saying is don't buy the stuff from my LHS then eh?

          I'll spread the net a little further as I want to buy some today if I can.
          Either that or persuade you local store to stock the fuel you want My local shop now stocks Optifuel Optimix 20%, mainly as I buy a couple of cases off him at a time, plus I get it post free as he can order a minimum quantity to get free shipping.

          Don't forget though, fire regulations can play a major part in exactly what sort of quantity the shop can keep in stock, they need to stock a mix to suit the heli, plane & car boys so may not be able to stock large quantities of any of it.

          If you're stuck for this weekend the Bekra is okay, a bit of an old formula these days but still works reasonably well although I prefer to stick to one fuel, not chop and change as you have to re-tune the engine every time.
          Steve H

          http://www.himbletonRChelicopters.co.uk
          Trex 600N, Trex 700N, now 3G!, Raptor E550 now in fetching Hughes 500E, Trex 250, Trex 500CF, Trex 550E 3G, Beam E4, Outrage 550, Logo 500 3D.

          Comment


          • #6
            You won't go wrong with Bekra 16% or there abouts, and it's kind to your engine bearings.
            JR Vibe Fifty fb (YS56)

            Comment


            • #7
              the bekra's ok to use
              and if the lhs stocks it then you have your local supply
              Hirobo Turbulence D3
              a bunch of bls servo's and a 701 gyro
              Powered by an OS91 hz and a MP2
              Winner of the LHC Scale Cup 2011

              1/4 scale Vario Bell 47 G3
              1/3 scale Vario R22
              2012 LHC Scale Cup Judge
              member of save the flybar foundation
              www.alcesterhelicopterclub.bmfa.org
              sigpic

              Comment


              • #8
                It now transpires that my LHS only has Bekra 20 in stock at the mo.

                Will this melt something if I use it?

                Martin

                Most of the Aligns, fair few Spektrum bits, bunch of Align & HiTec servos, OBE, VD & Bar.

                Comment


                • #9
                  I am about to go to Wings n wheels with the kids Hoping to pick up a bottle of Optifuel 20% while there, currently use Magnum 20% and have done for ages but would rather support UK companies especially (well only really) when its highly rated

                  Mart, you are welcome to use some of my Magnum 20% (and/or optifuel if I get it) tomorrow at the field

                  I usually pop over (about 1 hour) from me/you to Skyline to get my Magnum, dont think they stock Optifuel but I could be wrong - didnt see it last time I was there... think i asked as well...
                  Rob


                  T-Rex 450 Pro - BeastX v3 FBL, Hitec 5065's, DS520, Futaba R6203SB
                  Quad x-copter - KK 5.5 Multicopter v4.7, 850KVA motors, 30A ESC's, Orange RC FASST Rx, Carbon & Alu frame, LED strips for orientation, 10x4.5 props.
                  Quad x-copter - KK Plus 5.5d, 1000KVA motors, 30A ESC's, Orange RC FASST Rx, GF & Alu frame, LED strips, 10x4.5 props (coming soon!)
                  Futaba 9CP & 10CG

                  Comment


                  • #10
                    Hi Rob and thanks for your kind offer. I forgot about Wings and Wheels!

                    I guess it wouldn't hurt me to try the Bekra 20 eh? If I do get on with it, Addlestone Models, which is only about 3 miles from my office, stocks it.

                    Hope to see you at the club tomoz anyway. I do plan to go but earlyish.
                    Martin

                    Most of the Aligns, fair few Spektrum bits, bunch of Align & HiTec servos, OBE, VD & Bar.

                    Comment


                    • #11
                      Originally posted by Mart61 View Post
                      It now transpires that my LHS only has Bekra 20 in stock at the mo.

                      Will this melt something if I use it?

                      Yes, your spanky new NSP will go up in a puff of smoke and disintegrate in front of your very eyes
                      sigpic
                      Tonight Matthew..I am going to be.. Nitroman
                      Trex 600NSP
                      Blade MSR
                      Futaba 10C
                      Very proud owner of an EGS and Platinum Gold Star

                      Comment


                      • #12
                        Crikey! Hope you're joking Richard...

                        Martin

                        Most of the Aligns, fair few Spektrum bits, bunch of Align & HiTec servos, OBE, VD & Bar.

                        Comment


                        • #13
                          yes, I will try to get there fairly early - must remember to charge the old girl up tonight though whats the flying hours for a Sunday? think its 12:00-16:00 and I dont fancy rocking the boat breaking rules due to the recent issues with losing the field!
                          Rob


                          T-Rex 450 Pro - BeastX v3 FBL, Hitec 5065's, DS520, Futaba R6203SB
                          Quad x-copter - KK 5.5 Multicopter v4.7, 850KVA motors, 30A ESC's, Orange RC FASST Rx, Carbon & Alu frame, LED strips for orientation, 10x4.5 props.
                          Quad x-copter - KK Plus 5.5d, 1000KVA motors, 30A ESC's, Orange RC FASST Rx, GF & Alu frame, LED strips, 10x4.5 props (coming soon!)
                          Futaba 9CP & 10CG

                          Comment


                          • #14
                            Running Bekra 20 won't be a problem, best to richen up a few clicks to start and check engine temps. If anything, higher nitro makes tuning easier as you get a broader range where it's near enough plus a little more power.
                            Steve H

                            http://www.himbletonRChelicopters.co.uk
                            Trex 600N, Trex 700N, now 3G!, Raptor E550 now in fetching Hughes 500E, Trex 250, Trex 500CF, Trex 550E 3G, Beam E4, Outrage 550, Logo 500 3D.

                            Comment


                            • #15
                              I know it's mad but I'm off to Sussex Model Helicopters. They have loads of Optifuel 20 in stock and also an Align pitch gauge I need.

                              Chat later boys!

                              Martin

                              Most of the Aligns, fair few Spektrum bits, bunch of Align & HiTec servos, OBE, VD & Bar.

                              Comment

                              Working...
                              X