Dji 450 kit build

[Cobradave]

I hadn't seen that vid or done that, it's more like a flip than a drift at present! But thanks for this, I will do that as well before the next time I fly.
cheers
dave

[HAWK 30]

No its not the same.
Watch the video.

If you getting a drift you need to do the IMU calibration. Just follow the video.

++1

You are welcome Dave. Panosg, is absolutely correct. You need to do your bench calibration first. All on PC and the compass dance is done last thing! again if you are stuck just give me a bell.
Pros in the correct CW and CCW ? have you done your motor test on the bench as well ? to make sure that the correct motor is turning i.e. M1 top right, M2 top left etc….

[Cobradave]

Thanks all, looks like it was imu calibration, did that (but for some reason got warning mc was too hot!), re did dance, and just did a quick 2m high test in the back garden. Went up straight but way to windy to test anything else, but great news. So once again a big thanks to everyone for their help in getting me there. Now if any one can sort out the weather in gloucestershire.......

[Cobradave]

Hi, back again, just been researching the too hot message and it seems this is a common problem with the latest version of software. However, as I was reading picked up lots of other hints on set up, but interesting to see different posts saying that when doing the naza dance calibration, some saying leave the switch in manual mode when you do it, others saying leave it in the GPS mode, any consensus of view on this? Dji manual says start in gps mode and finish in gps mode so just checking! Had an indoor fly at the club last night and gps mode not as 'fixed' as I would have expected, so am going to redo all the calibration again, so thought I would check before completing! (Recognise indoor may not be perfect under a dome, but was getting full gps lock).
dave