Tweet
Receiver switch that i used on my velo. 30 Amps rated. This switch does not use mechanical contacts for the load, therefore it is less prone to failure caused by vibrations or dirt, reactor failsafe to ON if switch failure.
This electronic design uses high power M.FET for opening the switch and current limit is extremely higher than all mechanical switches.
●New Technology high current FET switching system
●Onboard LED indicator
●30A Continuous, 100A Pulse
●Electric current from input: 4.8-30V
●Silicon rubber electric wire AWG 18#
£11 posted
Zippy 2200 life, 2x1100 packs in parallel
£7 posted
HiTec 5085 servo, burnt out but gears good.
£5 posted
This electronic design uses high power M.FET for opening the switch and current limit is extremely higher than all mechanical switches.
●New Technology high current FET switching system
●Onboard LED indicator
●30A Continuous, 100A Pulse
●Electric current from input: 4.8-30V
●Silicon rubber electric wire AWG 18#
£11 posted
Zippy 2200 life, 2x1100 packs in parallel
£7 posted
HiTec 5085 servo, burnt out but gears good.
£5 posted
Comment