Tweet
UPDATE- PRICE NOW £200 shipped in UK. Will throw in a BNIB 3GX for £235 shipped.
Hi, Im selling an Unused RC aerodyne UH1N fuselage in the rescue scheme. Its for torque tube 500 size helicopters. These fuses keep all the mechanics up in the "doghouse" allowing you to really scale out the interior. These are only available to EU customers from Scaleflying.de. They sell this fuse for 449 Euros (about £400 ish) plus shipping. Im also including an Aviation Light set. The fuselage is in great condition as it is unused, but there a 2 minor things I would like to mention for complete transparency.
1) There is a small piece of fibreglass snapped off, where the doghouse connects to the main body. This is only visible when the doghouse is not connected, and does not affect structure at all. see attached photos.
2) on 1 of the sliding side doors, the vertical beam between the 2 windows is slightly bent inward. easily fixed. see photos.
Im looking for £325 ONO plus shipping for the fuselage kit, and I'll throw in the Nav light system.
PRICE LOWERED - £325 Shipped anywhere in the UK.
PRICE LOWERED AGAIN - £300 shipped in the UK.
PRICE DROP - £275 shipped in the UK
PRICE NOW £200 shipped in the UK.
Heres the detailed info from their website -
Bell UH1 Rescue 500size
All you need is a flying Trex 500, Chaos 500 or any Variant that utilizes a torque tube.
Thats right, the Bell UH-1N kit incorporates a torque tube drive tail system. The first of its kind. Just like the real helicopters, this drive system is extremely reliable, maintenance free and is extremely quick to install. No more adjusting, tightening belts, and lubricating drive systems. This is a plug n play system and is a dream to install.
The special designed side frames are designed to offer 2 unique features.
1. To lower the transmission allowing for the torque tube to travel thru the lower tail boom
of the helicopter. This has always been an issue with mostly military helicopters.
2. Probably the most revolutionary design in scale helicopters, these frames allow the entire
mechanical system to be tucked up inside the dog house just like the real helicopters.
This allows for a truly scale helicopter. Normally the mechanics would take up the entire
fuselage area, leaving no room for cockpits, rear seats etc.. That's all changed with
RC Aerodyne's new frame design.
Most of the work is done for you. Pre drilled holes for easy install of landing gear.
All wood work is installed.
Specification:
●Body length:1150mm ( 45.27 " )
●Body width:330mm ( 13 " )
●Body high:280mm (11 " )
Included :
●UH-1N / Bell 212 Scale Fuselage
●Scale Guns for Military Versions
●Upgrade Frame
●Shaf Driven Elevated Tail Rotor Set
●Water Transfer Decals
Thanks for looking, and check out my other FS thread for an RC aerodyne AH64 Apache fuselage BNIB. Also comes with Nav Light System, and parts to convert TT heli to belt so it will work with the raised tail of this fuselage.
cheers,
L
Hi, Im selling an Unused RC aerodyne UH1N fuselage in the rescue scheme. Its for torque tube 500 size helicopters. These fuses keep all the mechanics up in the "doghouse" allowing you to really scale out the interior. These are only available to EU customers from Scaleflying.de. They sell this fuse for 449 Euros (about £400 ish) plus shipping. Im also including an Aviation Light set. The fuselage is in great condition as it is unused, but there a 2 minor things I would like to mention for complete transparency.
1) There is a small piece of fibreglass snapped off, where the doghouse connects to the main body. This is only visible when the doghouse is not connected, and does not affect structure at all. see attached photos.
2) on 1 of the sliding side doors, the vertical beam between the 2 windows is slightly bent inward. easily fixed. see photos.
Im looking for £325 ONO plus shipping for the fuselage kit, and I'll throw in the Nav light system.
PRICE LOWERED - £325 Shipped anywhere in the UK.
PRICE LOWERED AGAIN - £300 shipped in the UK.
PRICE DROP - £275 shipped in the UK
PRICE NOW £200 shipped in the UK.
Heres the detailed info from their website -
Bell UH1 Rescue 500size
All you need is a flying Trex 500, Chaos 500 or any Variant that utilizes a torque tube.
Thats right, the Bell UH-1N kit incorporates a torque tube drive tail system. The first of its kind. Just like the real helicopters, this drive system is extremely reliable, maintenance free and is extremely quick to install. No more adjusting, tightening belts, and lubricating drive systems. This is a plug n play system and is a dream to install.
The special designed side frames are designed to offer 2 unique features.
1. To lower the transmission allowing for the torque tube to travel thru the lower tail boom
of the helicopter. This has always been an issue with mostly military helicopters.
2. Probably the most revolutionary design in scale helicopters, these frames allow the entire
mechanical system to be tucked up inside the dog house just like the real helicopters.
This allows for a truly scale helicopter. Normally the mechanics would take up the entire
fuselage area, leaving no room for cockpits, rear seats etc.. That's all changed with
RC Aerodyne's new frame design.
Most of the work is done for you. Pre drilled holes for easy install of landing gear.
All wood work is installed.
Specification:
●Body length:1150mm ( 45.27 " )
●Body width:330mm ( 13 " )
●Body high:280mm (11 " )
Included :
●UH-1N / Bell 212 Scale Fuselage
●Scale Guns for Military Versions
●Upgrade Frame
●Shaf Driven Elevated Tail Rotor Set
●Water Transfer Decals
Thanks for looking, and check out my other FS thread for an RC aerodyne AH64 Apache fuselage BNIB. Also comes with Nav Light System, and parts to convert TT heli to belt so it will work with the raised tail of this fuselage.
cheers,
L
Comment