Tweet
Prices as posted including delivery. If you want more than one item we can knock of a bit for postage when grouping them together... also sensible offers considered. Paypal accepted but either as gift or fees covered.
So first up, the 600 size items!
3 x Futaba BLS 451's - gears in perfect condition with no slop and were working great on my 600 Pro (selling because I'm stupid and want to go HV), few marks and dings in the plastic bodies but generally fairly good condition and top working order. I am supplying these with the blue metal align servo arms... Wires are sleeved in heat shrink - just heat it up, bend in to the shape you need and then when it cools it'll stay there and looks tidy! if you don't want it then it's easily cut off.
IMG_8246.jpg
Looking for £110 SOLD
1 x MKS BLS990 - silly fast tail servo... great performer. Only had about 20-30 flights on it before falling victim to upgrade-itis and the desire for a HV setup. This has a mark on the upper case from a dremel wheel because I'm a moron (see picture.. for the damage not the moron). Only cosmetic and you could improve with a black marker, or replacement cases are available for around 20-25 quid. Servo arms included, and wire also sleeved in heat shrink as the above.
IMG_8245.jpg
Looking for £55 due to the cosmetic mark
2 x Align 95mm carbon tail blades - barely used and one small chip of paint on the corner missing from where one tapped the shelf. Never tail struck.
IMG_8239.jpg
Looking for £7
Now for the 500 Items:
2 x Align 500 carbon frame sides - No cracks or chips, seem to be in good nick.
IMG_8243.jpg
Looking for £20 SOLD
1 x Complete Align 500 FBL head (including feathering shaft) + swash follower.
IMG_8240.jpg
Looking for £25 SOLD
1 x Align T-rex 500 swash - no slop, smooth bearings.
IMG_8242.jpg
looking for £15 SOLD
1 x Align BL500MX 1600kv motor with 13T pinion - the newer more powerful motor as far as I am aware.
IMG_8238.jpg
Looking for £35 SOLD
1 x Align T-Rex 500 metal tail unit (torque tube), plus some spare torque tube gears
IMG_8241.jpg
Looking for £15 SOLD
So thanks for looking... PM will get my attention quicker. Thanks!
So first up, the 600 size items!
3 x Futaba BLS 451's - gears in perfect condition with no slop and were working great on my 600 Pro (selling because I'm stupid and want to go HV), few marks and dings in the plastic bodies but generally fairly good condition and top working order. I am supplying these with the blue metal align servo arms... Wires are sleeved in heat shrink - just heat it up, bend in to the shape you need and then when it cools it'll stay there and looks tidy! if you don't want it then it's easily cut off.
IMG_8246.jpg
Looking for £110 SOLD
1 x MKS BLS990 - silly fast tail servo... great performer. Only had about 20-30 flights on it before falling victim to upgrade-itis and the desire for a HV setup. This has a mark on the upper case from a dremel wheel because I'm a moron (see picture.. for the damage not the moron). Only cosmetic and you could improve with a black marker, or replacement cases are available for around 20-25 quid. Servo arms included, and wire also sleeved in heat shrink as the above.
IMG_8245.jpg
Looking for £55 due to the cosmetic mark
2 x Align 95mm carbon tail blades - barely used and one small chip of paint on the corner missing from where one tapped the shelf. Never tail struck.
IMG_8239.jpg
Looking for £7
Now for the 500 Items:
2 x Align 500 carbon frame sides - No cracks or chips, seem to be in good nick.
IMG_8243.jpg
Looking for £20 SOLD
1 x Complete Align 500 FBL head (including feathering shaft) + swash follower.
IMG_8240.jpg
Looking for £25 SOLD
1 x Align T-rex 500 swash - no slop, smooth bearings.
IMG_8242.jpg
looking for £15 SOLD
1 x Align BL500MX 1600kv motor with 13T pinion - the newer more powerful motor as far as I am aware.
IMG_8238.jpg
Looking for £35 SOLD
1 x Align T-Rex 500 metal tail unit (torque tube), plus some spare torque tube gears
IMG_8241.jpg
Looking for £15 SOLD
So thanks for looking... PM will get my attention quicker. Thanks!
Comment