Tweet
Trex 450 PRO + Spares
Hi there ive got a 450pro up for sale i know longer want its almost brand new hardly any flights and no crashes, it comes with lots of spares and a few upgrades on the heli, All it requires is a spektrum 2.4 tx and a battery to get it flying 
Heli;
Carbon frames and tail fin, Align 450M motor, Align DS410 servos, align 35amp ESC (Soldered with XT60 connector), 3 amp external BEC (its running on 5v but it can be changed to run on 6v), Align GP780 Gyro, Spektrum AR6115e RX, Align DS520 tail servo, Stock align head, CY Stubz paddles, Align blades (newest version with the black carbon weave on the bottom), Align tail blades, Carbon tail pushrod, New V2 Battery tray, all frame bolts are either stainless steel or high carbon steel bolts (they wont strip when unskrewing), tail boomsupport bridge,
Spares;
2 canopys (450pro 2011 version), Set of ripmax carbon 325mm blades, 1 main gear and auto hub, 3 tail drive gears, V1 battery tray, antirotation bracket, Align Head block, blade grips, flybar cage, flybar cage, all mixing arms, washout base, flybar, swashplate, (all headparts to build another head), Metal bearing block holder, Tail pushrod, 2 sets of black plastic align tail blades and paddles (one set is brand new), One set of outrage programmable neon yellow paddles.
Ive setup and flow the heli and it flys great its using a 14 thooth pinion so at 100% throttle the HS is about 3000, Its had about 15 flights every thing is well protected and clean, the wireing is neat.
Im looking for abound £480 for the whole lot and that includes postage.
Thanks if you have any questions please let me know.
Cheers
Heli;
Carbon frames and tail fin, Align 450M motor, Align DS410 servos, align 35amp ESC (Soldered with XT60 connector), 3 amp external BEC (its running on 5v but it can be changed to run on 6v), Align GP780 Gyro, Spektrum AR6115e RX, Align DS520 tail servo, Stock align head, CY Stubz paddles, Align blades (newest version with the black carbon weave on the bottom), Align tail blades, Carbon tail pushrod, New V2 Battery tray, all frame bolts are either stainless steel or high carbon steel bolts (they wont strip when unskrewing), tail boomsupport bridge,
Spares;
2 canopys (450pro 2011 version), Set of ripmax carbon 325mm blades, 1 main gear and auto hub, 3 tail drive gears, V1 battery tray, antirotation bracket, Align Head block, blade grips, flybar cage, flybar cage, all mixing arms, washout base, flybar, swashplate, (all headparts to build another head), Metal bearing block holder, Tail pushrod, 2 sets of black plastic align tail blades and paddles (one set is brand new), One set of outrage programmable neon yellow paddles.
Ive setup and flow the heli and it flys great its using a 14 thooth pinion so at 100% throttle the HS is about 3000, Its had about 15 flights every thing is well protected and clean, the wireing is neat.
Im looking for abound £480 for the whole lot and that includes postage.
Thanks if you have any questions please let me know.
Cheers
Comment