Tweet
Hi all,
Not looking for sympathy here, but due to very serious illness I am very reluctantly forced to sell my Outrage Fusion 50. I purchased it from new from Fast Lads just after release so it is virtually standard airframe. The only changes I have made is to drill and tap the torque tube at both ends and to fit a Fusion 90 tail fin as I fly off grass.
I have never crashed this heli.
Currently set up for use on 10S, has 5mm drive support bearing, flybarless head set up. Specification as follows:
Main Blades: Spin Blades 600mm Flybarless Carbon
Tail Blades: Currently green KBDD, will include original carbons, but they have some wear.
Motor: Scorpion 4025-740KV, 12T pinion, (the motor has a few small cosmetic scratches)
ESC: Kontronik Jazz 55-10-32 complete with Jazz heatsink attached using proper Artic Silver thermal epoxy (this ESC looks to small but it barely gets warm for sport flying with some tic tocs etc thrown in, and you know its good it is a Kontronik!
Cyclic Servos: 3 x Align DS610 fitted with aluminium servo wheels
Tail Servo: Align DS620
Flybarless Unit: BeastX V2 (will flash to V3 if buyer requires but you will then have to reset all the servos etc)
Reciever: Spektrum AR6200 complete with satellite.
Wiring in place for separate receiver pack with 10AMP Hobbywing BEC (can easily get 3 flights off a 3s 800mAh reciever pack, uses about 300mAh)
Canopy is immaculate original Canomod canopy, I have reinforced the mounting holes.
Will also include all extra spare screws / bolts etc that came with the kit.
Happy to send pics if interested.
Looking for £475.00 delivered or make me a reasonable offer.
I will split the heli if anybody wants specific bits, please PM me, so before anyone asks the price on the airframe only is £220.00 delivered.
Sorry for long post, but thanks for looking.
Regards
Rich
Not looking for sympathy here, but due to very serious illness I am very reluctantly forced to sell my Outrage Fusion 50. I purchased it from new from Fast Lads just after release so it is virtually standard airframe. The only changes I have made is to drill and tap the torque tube at both ends and to fit a Fusion 90 tail fin as I fly off grass.
I have never crashed this heli.
Currently set up for use on 10S, has 5mm drive support bearing, flybarless head set up. Specification as follows:
Main Blades: Spin Blades 600mm Flybarless Carbon
Tail Blades: Currently green KBDD, will include original carbons, but they have some wear.
Motor: Scorpion 4025-740KV, 12T pinion, (the motor has a few small cosmetic scratches)
ESC: Kontronik Jazz 55-10-32 complete with Jazz heatsink attached using proper Artic Silver thermal epoxy (this ESC looks to small but it barely gets warm for sport flying with some tic tocs etc thrown in, and you know its good it is a Kontronik!
Cyclic Servos: 3 x Align DS610 fitted with aluminium servo wheels
Tail Servo: Align DS620
Flybarless Unit: BeastX V2 (will flash to V3 if buyer requires but you will then have to reset all the servos etc)
Reciever: Spektrum AR6200 complete with satellite.
Wiring in place for separate receiver pack with 10AMP Hobbywing BEC (can easily get 3 flights off a 3s 800mAh reciever pack, uses about 300mAh)
Canopy is immaculate original Canomod canopy, I have reinforced the mounting holes.
Will also include all extra spare screws / bolts etc that came with the kit.
Happy to send pics if interested.
Looking for £475.00 delivered or make me a reasonable offer.
I will split the heli if anybody wants specific bits, please PM me, so before anyone asks the price on the airframe only is £220.00 delivered.
Sorry for long post, but thanks for looking.
Regards
Rich
Comment