Tweet
Couple of bits for sale...
- First up a brand new still in anti-static bag XP-7A ESC - looking for £8 delivered SOLD PENDING PAYMENT
IMG_8145.jpg
- Second up a lightly used C05M (1mm shaft version) with 8T pinion and pre-shortened wires... This motor is a light upgrade from stock with a bit more pop but great run times, you can still use the stock tail if you wish, and of course no more burning out brushed motors. Looking for £10 delivered, or as a combo with the XP-7A above I'll do both for £15 delivered... if you do this one with a bit of care you can end up lighter than stock! more power and lighter - how can that be bad.... Pinion is a bit damaged at end but the part that contacts the gear is fine. Fits the stock pinion if you want to swap it over with your stock one. SOLD PENDING PAYMENT
IMG_8143.jpg
- Lastly, an HP05S with brand new 9T pinion fitted, connected to an XP-7A ESC which is already programmed for the setup. This was my latest setup and is a big step up in power but will require extra upgrades like SR120 tail and bigger batts for example. For this I'm asking £20 delivered. SOLD
IMG_8144.jpg
What you see in the photos is what you get - to complete all upgrades you will need something like "the steve" convertor which can be had here for $16 including postage (second buy it now button down) HighSpeed Brushless Converter's by TheSteve
- First up a brand new still in anti-static bag XP-7A ESC - looking for £8 delivered SOLD PENDING PAYMENT
IMG_8145.jpg
- Second up a lightly used C05M (1mm shaft version) with 8T pinion and pre-shortened wires... This motor is a light upgrade from stock with a bit more pop but great run times, you can still use the stock tail if you wish, and of course no more burning out brushed motors. Looking for £10 delivered, or as a combo with the XP-7A above I'll do both for £15 delivered... if you do this one with a bit of care you can end up lighter than stock! more power and lighter - how can that be bad.... Pinion is a bit damaged at end but the part that contacts the gear is fine. Fits the stock pinion if you want to swap it over with your stock one. SOLD PENDING PAYMENT
IMG_8143.jpg
- Lastly, an HP05S with brand new 9T pinion fitted, connected to an XP-7A ESC which is already programmed for the setup. This was my latest setup and is a big step up in power but will require extra upgrades like SR120 tail and bigger batts for example. For this I'm asking £20 delivered. SOLD
IMG_8144.jpg
What you see in the photos is what you get - to complete all upgrades you will need something like "the steve" convertor which can be had here for $16 including postage (second buy it now button down) HighSpeed Brushless Converter's by TheSteve
Comment