Tweet
This is the latest 2011 version of the T-Rex 450 Pro which came as standard with the uprated BL-450M (3500kv) motor & RCE-BL35X 35amp ESC.
The heli is fitted with the following;
Xtreme Productions 325mm carbon fibre main blades
Edge carbon tail rotor blades,
3 x Align DS410M cyclic servos,
1 x Align DS520 tail servo, Align GP780 Gyro.
Metal anti-rotation bracket and tail servo mount upgrades (original parts are included in spares, see below). Fusuno Batman stabilizer set.
Spektrum 6100e Receiver installed.
Comes with Align 450 aluminium carry case
I have also fitted a new set of the earlier style separate landing skids and skid pipes as I prefer these personally but the original one piece style is also included.
Heli has just been fitted with brand new main gear, auto rotation gear,torque tube, tail boom with new front & rear t/tube gear sets.
Included are the original canopy (I will remove all decalsand pilot names) and also a Fusuno Flasher 450 EX style canopy, which is unmarked. Both have canopy covers.
2 x Turniguy 40-50C 2200mah 3S lipos with 30+ cycles butwith absolutely no puffing. I also have an Overlander Sport 25C 2200mah 3Swhich has some puffing and I now only use this for set-up, tracking etc.
Lipos and ESC are fitted with XT60 connectors.
The following spares are included (all new and unused, someare still in original packaging, some are loose)
(There are additional items in the photos that are now no longer available, what is listed below is what is included)
2 x main gears
2 x auto rotation gears
1 x main shaft
2 x flybar rods
3 x feathering shaft
1 pr. Original tail blades
1 Head button
1 Original nylon anti rotation bracket
1 original nylon tail servo mount
1 Tail linkage rod
1 pack H45045T Ball links
1 pack H45046T Ball links A/B
1 pack H45048 linkage ball set
1 pack H45093 Canopy Mounting Bolt
2 packs H51297 Canopy nuts
2 packs H1268 Thrust bearing sets
1 Original one piece landing gear (white)
1 DS410M servo gear set (metal)
3 x 325D carbon fibre main blades
2 x 325F carbon main blade.
The blades have all had some use, but are all in good conditionwith no nicks or marks.
I will also include an RC Screwz Stainless Steel screw set(not complete) and all the loose screws, washers, ball links, etc. and the original manual.
This is a fantastic heli and has plenty of power for full on3D but also just as happy as a sports flier. It has always been set-up and maintained very well.
Asking price £295.00 included everything above, open tooffers but please keep them serious or realistic.
Can be collected or will ship by next day courier for £9.95.
Payment accepted by paypal as gift or fees paid, or by banktransfer.
T-Rex 450 Pro-1.jpgT-Rex 450 Pro Spares.jpgT-Rex 450 Pro & Spares-2.jpgT-Rex 450 Pro & Spares-1.jpgT-Rex 450 Pro - Tail.jpgT-Rex 450 Pro-2.jpgT-Rex 450 Pro NC-2.jpgT-Rex 450 Pro NC.jpgT-Rex 450 Pro in case.jpgT-Rex 450 Pro & Spares-3.jpg
The heli is fitted with the following;
Xtreme Productions 325mm carbon fibre main blades
Edge carbon tail rotor blades,
3 x Align DS410M cyclic servos,
1 x Align DS520 tail servo, Align GP780 Gyro.
Metal anti-rotation bracket and tail servo mount upgrades (original parts are included in spares, see below). Fusuno Batman stabilizer set.
Spektrum 6100e Receiver installed.
Comes with Align 450 aluminium carry case
I have also fitted a new set of the earlier style separate landing skids and skid pipes as I prefer these personally but the original one piece style is also included.
Heli has just been fitted with brand new main gear, auto rotation gear,torque tube, tail boom with new front & rear t/tube gear sets.
Included are the original canopy (I will remove all decalsand pilot names) and also a Fusuno Flasher 450 EX style canopy, which is unmarked. Both have canopy covers.
2 x Turniguy 40-50C 2200mah 3S lipos with 30+ cycles butwith absolutely no puffing. I also have an Overlander Sport 25C 2200mah 3Swhich has some puffing and I now only use this for set-up, tracking etc.
Lipos and ESC are fitted with XT60 connectors.
The following spares are included (all new and unused, someare still in original packaging, some are loose)
(There are additional items in the photos that are now no longer available, what is listed below is what is included)
2 x main gears
2 x auto rotation gears
1 x main shaft
2 x flybar rods
3 x feathering shaft
1 pr. Original tail blades
1 Head button
1 Original nylon anti rotation bracket
1 original nylon tail servo mount
1 Tail linkage rod
1 pack H45045T Ball links
1 pack H45046T Ball links A/B
1 pack H45048 linkage ball set
1 pack H45093 Canopy Mounting Bolt
2 packs H51297 Canopy nuts
2 packs H1268 Thrust bearing sets
1 Original one piece landing gear (white)
1 DS410M servo gear set (metal)
3 x 325D carbon fibre main blades
2 x 325F carbon main blade.
The blades have all had some use, but are all in good conditionwith no nicks or marks.
I will also include an RC Screwz Stainless Steel screw set(not complete) and all the loose screws, washers, ball links, etc. and the original manual.
This is a fantastic heli and has plenty of power for full on3D but also just as happy as a sports flier. It has always been set-up and maintained very well.
Asking price £295.00 included everything above, open tooffers but please keep them serious or realistic.
Can be collected or will ship by next day courier for £9.95.
Payment accepted by paypal as gift or fees paid, or by banktransfer.
T-Rex 450 Pro-1.jpgT-Rex 450 Pro Spares.jpgT-Rex 450 Pro & Spares-2.jpgT-Rex 450 Pro & Spares-1.jpgT-Rex 450 Pro - Tail.jpgT-Rex 450 Pro-2.jpgT-Rex 450 Pro NC-2.jpgT-Rex 450 Pro NC.jpgT-Rex 450 Pro in case.jpgT-Rex 450 Pro & Spares-3.jpg
Comment