Tweet
Hi
I have 2x Nitro TZ.90's, I have had these for a year and they have been great, the only reason i am selling is because i flew an electric recently and now i'm changing over.
The auction is for two airframes exactly the same as pictured, the picture is of one the other is exactly the same right down to the stickers on the canopy. I will include as much as possible such as fuel tubing, clunks, fuel valves, and all the control links will be in place ready for servo's and horns. I will leave the velcro and pads on the radio tray so you know where stuff goes.
Also included is an extremely VAST amount of spares, if it does not breach the wording limit i will include as much as i can below.
Spares for these helis are cheap, they can be obtained from hobbyking and amainhobbies in the US, with the exchange rate at the moment this is very very favourable, some examples below.
Tailbooms = $2.50
Swashplate = £12.00
Main shafts = $3.50
Complete main frames = £40
These is a brilliant heli for somebody looking to goto a .90 without the part/kit costs of a more mainstream .90.
For the entire package i am asking the following which will include.
Airframe No.1
Airframe No.2
All Spares as listed below.
£450
I have some more pics as well so if your interested let me know.
Just to be clear - this is for the airframes and spares, no engines, servos, receivers etc are included or anything else other than stated.
List of spares below - Note :- There is definately at least x1 kit here minus mainframe and tailboom plus many many extra parts to support 2-3 crashes worth ! ! !
Spares
Complete New in Bags
5x Mainshafts 3x in bags 2x seperate but straight.
1x Starter Shaft & Coupling
1x 140 CCPM control Rods
2x Packs of complete replacement bars
1x Tail rotor shaft
1x Feathering Spindle
6x Main Gears
4x Tail Gears
1x Set of Paddles
1x Undercarrage
2x Packs of Fuel line clamps
1x Pack of rubber gromets
1x flybar
Spares not in bags (were storred in a spares tray)
1x pr of tail blades
1x cooling fan shroud
1x fuel tank
1x header tank
1x pr of Paddles
1x Main Frame brace/center bearing block
1x radio tray
1x replacement tail belt
1x pr of undercarrage skid pipes
1x gyro servo linkage
1x Complete elevator linkage and control arm
1x rotor head block
1x feathering shaft
1x complete set of tail blade holders
4x washout mixers
1xflybar hub
1x complete swashplate
1x front metal brace
1x pr main blade holders
1x Mixer base
4x mixer arms
1x flybar carrier
4x mixer bearings
2x aileron control arms
1x tail belt tensioner
6x various frame spacers
1x head button
22x control arms and ball links
2x tailboom braces
4x bearing blocks + bearings
1x engine mount
2x complete clutch sets.
Note this is not all the spares just an idea
[IMG]
http://img.photobucket.com/albums/v476/TewT/RADIO%20CONTROL/Helicopters/For%20Sale%20Items/DSC01011.jpg[/IMG]
I have 2x Nitro TZ.90's, I have had these for a year and they have been great, the only reason i am selling is because i flew an electric recently and now i'm changing over.
The auction is for two airframes exactly the same as pictured, the picture is of one the other is exactly the same right down to the stickers on the canopy. I will include as much as possible such as fuel tubing, clunks, fuel valves, and all the control links will be in place ready for servo's and horns. I will leave the velcro and pads on the radio tray so you know where stuff goes.
Also included is an extremely VAST amount of spares, if it does not breach the wording limit i will include as much as i can below.
Spares for these helis are cheap, they can be obtained from hobbyking and amainhobbies in the US, with the exchange rate at the moment this is very very favourable, some examples below.
Tailbooms = $2.50
Swashplate = £12.00
Main shafts = $3.50
Complete main frames = £40
These is a brilliant heli for somebody looking to goto a .90 without the part/kit costs of a more mainstream .90.
For the entire package i am asking the following which will include.
Airframe No.1
Airframe No.2
All Spares as listed below.
£450
I have some more pics as well so if your interested let me know.
Just to be clear - this is for the airframes and spares, no engines, servos, receivers etc are included or anything else other than stated.
List of spares below - Note :- There is definately at least x1 kit here minus mainframe and tailboom plus many many extra parts to support 2-3 crashes worth ! ! !
Spares
Complete New in Bags
5x Mainshafts 3x in bags 2x seperate but straight.
1x Starter Shaft & Coupling
1x 140 CCPM control Rods
2x Packs of complete replacement bars
1x Tail rotor shaft
1x Feathering Spindle
6x Main Gears
4x Tail Gears
1x Set of Paddles
1x Undercarrage
2x Packs of Fuel line clamps
1x Pack of rubber gromets
1x flybar
Spares not in bags (were storred in a spares tray)
1x pr of tail blades
1x cooling fan shroud
1x fuel tank
1x header tank
1x pr of Paddles
1x Main Frame brace/center bearing block
1x radio tray
1x replacement tail belt
1x pr of undercarrage skid pipes
1x gyro servo linkage
1x Complete elevator linkage and control arm
1x rotor head block
1x feathering shaft
1x complete set of tail blade holders
4x washout mixers
1xflybar hub
1x complete swashplate
1x front metal brace
1x pr main blade holders
1x Mixer base
4x mixer arms
1x flybar carrier
4x mixer bearings
2x aileron control arms
1x tail belt tensioner
6x various frame spacers
1x head button
22x control arms and ball links
2x tailboom braces
4x bearing blocks + bearings
1x engine mount
2x complete clutch sets.
Note this is not all the spares just an idea
[IMG]http://img.photobucket.com/albums/v476/TewT/RADIO%20CONTROL/Helicopters/For%20Sale%20Items/DSC01011.jpg[/IMG]
Comment