Tweet
Compass Atom 550E Flybarless beastx, this is in brand new condition, this was built from day 1 as Flybarless and stretched to 550. This baby has loads of power and has the best power to weight ratio of any other 550 out there, will out fly a Trex 550 all day. You can easily fly for 8 minutes sport or 6 minutes 3D on a 3000mah 6s batt.
Here’s what included;
Compass Atom 550e flybarless
Rotortech 515mm carbon blades
BeastX Flybarless Controller
Stock Compass motor and ESC
85mm KBDD Tail Blades
3 x Align DS510 Cyclic Servos
Align DS650 Cyclic Servos
Add Rx and Batt to Fly
There is also a 9 teeth Mod 1 pinion (for crazy head speed with 515mm blades or to fly with 425-500mm blades) and a pair of stock compass 72mm tail blades.
This heli is about 40 flights old bought last September and all servos and Beastx were bought brand new for this build. This heli has never been crashed, it has tipped over once when I reversed the servo wires by mistake on the beastx but the only damage was blades which I have now replaced with Rotortech ones. If I was to point a finger at any negatives on the heli it would be a tiny paint chip on the canopy were the servo arm rubs against it sometime. Nothing that would put one off but want to keep it clear (see pic)
You are welcome to come and see it fly.
£450 posted paypal fees covered or gift or £210 posted airframe, motor, ESC and blades.
Here’s what included;
Compass Atom 550e flybarless
Rotortech 515mm carbon blades
BeastX Flybarless Controller
Stock Compass motor and ESC
85mm KBDD Tail Blades
3 x Align DS510 Cyclic Servos
Align DS650 Cyclic Servos
Add Rx and Batt to Fly
There is also a 9 teeth Mod 1 pinion (for crazy head speed with 515mm blades or to fly with 425-500mm blades) and a pair of stock compass 72mm tail blades.
This heli is about 40 flights old bought last September and all servos and Beastx were bought brand new for this build. This heli has never been crashed, it has tipped over once when I reversed the servo wires by mistake on the beastx but the only damage was blades which I have now replaced with Rotortech ones. If I was to point a finger at any negatives on the heli it would be a tiny paint chip on the canopy were the servo arm rubs against it sometime. Nothing that would put one off but want to keep it clear (see pic)
You are welcome to come and see it fly.
£450 posted paypal fees covered or gift or £210 posted airframe, motor, ESC and blades.
Comment