Announcement

Collapse
No announcement yet.

Art Tech Cap 232 - Swap Wanted

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Art Tech Cap 232 - Swap Wanted

    As above, electric, balsa, 3ft span, comes with 1 1300mah 3s lipo, hs65mg on all control surfaces except rudder which is on stock servo, ar6200 full range rx, outrunner fitted but comes with spare inrunner motor and mount, spare props, wheel pants.

    Flys wonderfully and only gripe is the fuzz has had a repair in the middle above the wing and the cowling has seen better days but replacements can be sought online if your picky, neither in any way affect flight.

    I'd like to swap for a small heli like an Msr/Sr120 or similar, Tx not needed as I have a dX6i, something I can use indoors whilst my blade is grounded due to sh*t weather, if you don't have the above just try me with what you have as you never know.

    As a rough guide my plane (stock) goes BNF for £148+, I don't expect what it costs new but remember its on 2.4 and it has uprated servo's etc, electronics can be removed if you just want an airframe but that is the only reason I would split it.

    If you are interested please PM me so that the notification email comes to my phone, that way I can reply same day and not in a weeks time.
    I can travel/meet but obviously only to sensible locations.
    Last edited by Sqwidge; 13-01-2011, 09:59 PM.
    Nik.

    Before you ask:

    About 2 miles
    Over £500
    Very difficult
    Over 80mph
    NO, you can't have a go



    Don't forget the 'Search' and 'Thanks' buttons.

    RIP Anthony 'Tinny' Lombardi (25195517)

  • #2
    Now on eBay so if it sells and you have an Mcx/Msr/Sr or similar let me know so I can have a think about it.
    Nik.

    Before you ask:

    About 2 miles
    Over £500
    Very difficult
    Over 80mph
    NO, you can't have a go



    Don't forget the 'Search' and 'Thanks' buttons.

    RIP Anthony 'Tinny' Lombardi (25195517)

    Comment

    Working...
    X