Tweet
*Brand New VERSION 2*, never mounted or flown, includes instruction. SOLD
Instructions:
●3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance.
●Utilizes Silicon Micro Machine (SMM) sensors for excellent stability.
●12 bit processors providing ultra high resolution, resulting in highly precise controls
●Software upgradable through PC interface adapter (sold separately)
●Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve.
●Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption.
●Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system.
●Suitable for all CCPM and mechanical mixing system.
●Comaptible with helicopter of all sizes from T-Rex 250 to T-Rex 700.
●Innovative Pitch Gau as an aid to facilitate pitch adjustments.
●High frame rate signal output for faster and higher precision servo response.
●Capable to operate between 3V to 8.4V, compatible with high voltage servos.
●Small footprint, light weight, minimalists and reliable design.
Specification:
●Suitable Voltage Range
C 3~8.4V
●Current ComsumptionC11.1-22.2V 3-6cell Li-Po
●Flip and Roll rate detection speed: :±300degrees/sec
●Rudder rate detection speed:±500degrees/sec
●Sensor resolution:12bit
●Operating temperatur:-20℃~65℃
●Operating humidity:0%~95%
●RoHS certified
●Dimension:
Control box:42x26.5x14.5mm
Sensor:22.3x21.7x14mm
●Weight:
Control box:16g
Sensor:9g
Including the following:
●ALIGN 3G Programmable Flybarless System X1
●Signal extension wire 100mm x1
●Signal extension wire 220mm x1
●Sensor mounting foam x2
Programmable by the NEW Align 3G Link cable HEP3GF02, not included.
●3G link cable incorporates PC configuration GUI (graphical user interface) and latest 3G firmware update to improve system stability, and added pirouette compensation to stabilize center point during pirouettes.
●Opens up numerous configuration parameters within the 3G system. Pilots can fine tune the system through the PC GUI to suit individual preferences.
●Configurable parameters includes options relating to aileron, elevator, rudder, and combined functions.
●Provides real time display of radio control signal speed output, so pilot can fine tune the system based on the helicopter response to control sticks relationship display .
●Ability to display the current status of parameters in 3G system for setup verification.
●Parameter import/export function to allow backup of settings, as well as exchange of parameters with others through internet.
●Compatible with USB version 1.0/1.1/2.0
●Minimum OS requirement:WINDOWS XP/ VISTA/ 7
●CD Content:
3G V2.1 Upgrade Software
3G Configuration GUI
USB Driver
Microsoft .NET Framework 3.5 URL
Instruction Manual
●USB 3G Link cable x 1
●USB extension cable x 1
●Signal Y-adapter x 1
●Installation CD x 1
Instructions:
●3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance.
●Utilizes Silicon Micro Machine (SMM) sensors for excellent stability.
●12 bit processors providing ultra high resolution, resulting in highly precise controls
●Software upgradable through PC interface adapter (sold separately)
●Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve.
●Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption.
●Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system.
●Suitable for all CCPM and mechanical mixing system.
●Comaptible with helicopter of all sizes from T-Rex 250 to T-Rex 700.
●Innovative Pitch Gau as an aid to facilitate pitch adjustments.
●High frame rate signal output for faster and higher precision servo response.
●Capable to operate between 3V to 8.4V, compatible with high voltage servos.
●Small footprint, light weight, minimalists and reliable design.
Specification:
●Suitable Voltage Range
C 3~8.4V●Current Comsumption
C11.1-22.2V 3-6cell Li-Po●Flip and Roll rate detection speed: :±300degrees/sec
●Rudder rate detection speed:±500degrees/sec
●Sensor resolution:12bit
●Operating temperatur:-20℃~65℃
●Operating humidity:0%~95%
●RoHS certified
●Dimension:
Control box:42x26.5x14.5mm
Sensor:22.3x21.7x14mm
●Weight:
Control box:16g
Sensor:9g
Including the following:
●ALIGN 3G Programmable Flybarless System X1
●Signal extension wire 100mm x1
●Signal extension wire 220mm x1
●Sensor mounting foam x2
Programmable by the NEW Align 3G Link cable HEP3GF02, not included.
●3G link cable incorporates PC configuration GUI (graphical user interface) and latest 3G firmware update to improve system stability, and added pirouette compensation to stabilize center point during pirouettes.
●Opens up numerous configuration parameters within the 3G system. Pilots can fine tune the system through the PC GUI to suit individual preferences.
●Configurable parameters includes options relating to aileron, elevator, rudder, and combined functions.
●Provides real time display of radio control signal speed output, so pilot can fine tune the system based on the helicopter response to control sticks relationship display .
●Ability to display the current status of parameters in 3G system for setup verification.
●Parameter import/export function to allow backup of settings, as well as exchange of parameters with others through internet.
●Compatible with USB version 1.0/1.1/2.0
●Minimum OS requirement:WINDOWS XP/ VISTA/ 7
●CD Content:
3G V2.1 Upgrade Software
3G Configuration GUI
USB Driver
Microsoft .NET Framework 3.5 URL
Instruction Manual
●USB 3G Link cable x 1
●USB extension cable x 1
●Signal Y-adapter x 1
●Installation CD x 1
Comment