Tweet
As per the title I have 700LE Silver converted out of the box to electric with the nitro parts still present and unused, I also upgraded several parts during the initial build.
Here is a full list/spec:
Trex 700 LE in silver inc. blades but no electronics.
KDE tail upgrade (as I didn't want to fall victim to the bolt snapping issue plus it sandwiches a thrust between 2 radial bearings like high end machines)
KDE Elevator servo support (looks nice and holds the elevator servo rigid)
Align Mod1 Gears Main and auto (however I stripped the main so this needs replacing £12 for 2)
Lynx frame screws
Trueblood dampers
Quick UK balls and links
Quick UK Boomclamp
Electric conversion (the carbon one with motor bracing costs £56)
KDE Pinion Support
Custom Canopy Fleece cover (says "700LE Electric in large font and "Align Fanboy" underneath in small font)
Had exactly 24 x 5min (or less) flights and never crashed.
Where a part has been upgraded the original unused part is also supplied.
Main blades are unused (I used some radix I had already) Tail blades were used last few flights.
Box, manual, spare boom, crying towel all present.
Only wear apparent is to the bottom of the canopy where it touches the frame there is a little bit of paint missing about 10mm x 5mm both sides, I would just cut those sections away were I keeping it.
Reason for sale: I just didn't like it as much as I thought I would and I have pre ordered an N5 and want the electronics for that.
To buy this lot from a popular Northern Heli shop would cost you £757.89
I would like £425 plus delivery if required, however I would much rather it was collected.
Here is a full list/spec:
Trex 700 LE in silver inc. blades but no electronics.
KDE tail upgrade (as I didn't want to fall victim to the bolt snapping issue plus it sandwiches a thrust between 2 radial bearings like high end machines)
KDE Elevator servo support (looks nice and holds the elevator servo rigid)
Align Mod1 Gears Main and auto (however I stripped the main so this needs replacing £12 for 2)
Lynx frame screws
Trueblood dampers
Quick UK balls and links
Quick UK Boomclamp
Electric conversion (the carbon one with motor bracing costs £56)
KDE Pinion Support
Custom Canopy Fleece cover (says "700LE Electric in large font and "Align Fanboy" underneath in small font)
Had exactly 24 x 5min (or less) flights and never crashed.
Where a part has been upgraded the original unused part is also supplied.
Main blades are unused (I used some radix I had already) Tail blades were used last few flights.
Box, manual, spare boom, crying towel all present.
Only wear apparent is to the bottom of the canopy where it touches the frame there is a little bit of paint missing about 10mm x 5mm both sides, I would just cut those sections away were I keeping it.
Reason for sale: I just didn't like it as much as I thought I would and I have pre ordered an N5 and want the electronics for that.
To buy this lot from a popular Northern Heli shop would cost you £757.89
I would like £425 plus delivery if required, however I would much rather it was collected.
x 3
Comment