Tweet
LOWER PRICE!!!
I have for sale my Gaui 200 3D Pro SD Torque Tube Version with V2 parts and tons of spares!
The Gaui 200 3D Pro SD Torque Tube is the smallest fully 3D capable heli in the market today
Equipped with all CNC precision metal parts.
Kit comes with High Power Brushless motor and ESC.
The best servo position for CCPM swash plate. All linkages which link to the swash plate are all vertical to the servo arms.
Torque Tube tail rotor system with one-way main gear.
1mm thick Carbon fiber mainframe and fin set.
The swash plate and the rotor head system equipped with Precision CNC titanium anodized aluminum.
Fully equipped ball bearings.(33 micro bearings)
Seesaw head with bell-hiller system.
CCPM collective pitch mechanism (variable pitch).
It has the new Gaui V2 complete metal CNC tail and CNC V2 battery tray on it, these are both a amazing upgrade, the tail is virtually slop free and performs much better in flight than any other 200-250 heli around!
This heli is very stable and flies amazing for it's size! It can do any full 3D manoeuvre. Full CNC metal head/tail! Fully ball raced.
Perfect for any pilot - beginner to expert 3D pilot.
* Overall length: 415mm (Including canopy)
* Main rotor diameter: 428mm
* Tail rotor diameter: 100mm
* Flying weight: 250g ~ 280g
* Main rotor blades: ~200-210mm
* Flying duration: 5~10 minutes depending on use and set-up.
Here are the options I have created. If you need anything else please contact me by the email below.
One complete set-up airframe + brushless motor + brushless ESC for £90. Bought for 205 pounds when new.
OR
One complete set-up airframe + 3X HS-45HB servos + Futaba digital S3153 tail servo + brushless motor + brushless ESC all installed and ready for £130.
Put a receiver in and a gyro and you're ready to fly!!!!
I also have four 2S 900mAh Kong Power 15C lipos which work absolutely perfect with this heli. £24 takes them all.
They have about 12 cycles each balanced and never over discharged.
Every metal to metal screw is threadlocked and is really well put together. Paper manual and original box included.
Spares I have also for sale:
* 3X Gaui Glass fibre canopies and 1x 9 gram plastic brand new not used with hi-vis decals from Hi-Vis decals.
* 1X complete carbon airframe spare
* 2X H200SD Tail boom with bearings pre-installed (Titanium anodized)
* 2X CF tail boom (silver)
* 1X pair of flybar paddles + 1X pair out of packet
* 2X pair of tail rotor blades + 1X pair out of packet
* 1X CNC swashplate guide (anti rotation bracket)
* 1X V2 CNC tail pitch lever set (bell crank)
* 1X CNC boom mount + hardware
* 1X pair of main shafts (PRO LONG) + 2X out of packet
* 1X CNC see-saw set + hardware
* 1X Tail pitch control set
* 1X Boom supports pack
* 1X Spindle shafts pack
* 1X SD Tail output shaft set + 2X out of packet(Think are straight)
* 1X Tail pitch link set
* 1X Hurricane 200 metal parts pack (opened rest is in parts/extras box)
* 1X Landing gear brace set (white) + hardware
* 1X Long tail rotor belt + 1X out of packet
* 1X H200 Landing gear skids pack + hardware
* 3X Flybars pack (two per a bag) (One opened with 1X flybar in)
* 1X Balls - Extension for CNC swashplate and hardware
* 1X Metal balls-Pack 3.5mm with neck and hardware (opened but still many inside)
* 1X Swashplate guide (anti rotation bracket) + 2X out of packet
* 2X tail servo mount set
* 1X Machine Screws (opened but still many in packet)
* 3X H200SD Crown gear with hardware + 1X out of packet and more hardware
* 2X Tail rotor hubs pack (pair with hardware) (one opened with one hub left)
* 1X Universal links pack (opened)
* 1X Hurricane 200 linkage set (opened)
* 3X Main gears (opened)
* 1X 2 tail boom support set with hardware
* 2X Mast collars pack (L)
* 1X Mast collars pack (S)
* 1X H200SD tail driven shaft with bevel gear
* 1X Damper Rubbers pack (opened)
* Various carbon fins vertical and horizontal
* Loads of V1 tail bits + Carbon tail cases
* 1X CNC tail servo mounts
* 2X plastic reinforced blades balanced and COG balanced (not in packet)
* 1X wooden 3D blades balanced and COG balanced
* 2X wooden 3D blades new in packet
* Loads of spare bits in a box as pictured, always helps out if you loose something etc.
* Hitec servo horns x 6 of two designs(Depends if I sell servos)
* 3X HS-45HB Karbonite gear set (Depends if I sell servos)
SOLD TO PADDY
Laurence
I have for sale my Gaui 200 3D Pro SD Torque Tube Version with V2 parts and tons of spares!
The Gaui 200 3D Pro SD Torque Tube is the smallest fully 3D capable heli in the market today
Equipped with all CNC precision metal parts.
Kit comes with High Power Brushless motor and ESC.
The best servo position for CCPM swash plate. All linkages which link to the swash plate are all vertical to the servo arms.
Torque Tube tail rotor system with one-way main gear.
1mm thick Carbon fiber mainframe and fin set.
The swash plate and the rotor head system equipped with Precision CNC titanium anodized aluminum.
Fully equipped ball bearings.(33 micro bearings)
Seesaw head with bell-hiller system.
CCPM collective pitch mechanism (variable pitch).
It has the new Gaui V2 complete metal CNC tail and CNC V2 battery tray on it, these are both a amazing upgrade, the tail is virtually slop free and performs much better in flight than any other 200-250 heli around!
This heli is very stable and flies amazing for it's size! It can do any full 3D manoeuvre. Full CNC metal head/tail! Fully ball raced.
Perfect for any pilot - beginner to expert 3D pilot.
* Overall length: 415mm (Including canopy)
* Main rotor diameter: 428mm
* Tail rotor diameter: 100mm
* Flying weight: 250g ~ 280g
* Main rotor blades: ~200-210mm
* Flying duration: 5~10 minutes depending on use and set-up.
Here are the options I have created. If you need anything else please contact me by the email below.
One complete set-up airframe + brushless motor + brushless ESC for £90. Bought for 205 pounds when new.
OR
One complete set-up airframe + 3X HS-45HB servos + Futaba digital S3153 tail servo + brushless motor + brushless ESC all installed and ready for £130.
Put a receiver in and a gyro and you're ready to fly!!!!
I also have four 2S 900mAh Kong Power 15C lipos which work absolutely perfect with this heli. £24 takes them all.
They have about 12 cycles each balanced and never over discharged.
Every metal to metal screw is threadlocked and is really well put together. Paper manual and original box included.
Spares I have also for sale:
* 3X Gaui Glass fibre canopies and 1x 9 gram plastic brand new not used with hi-vis decals from Hi-Vis decals.
* 1X complete carbon airframe spare
* 2X H200SD Tail boom with bearings pre-installed (Titanium anodized)
* 2X CF tail boom (silver)
* 1X pair of flybar paddles + 1X pair out of packet
* 2X pair of tail rotor blades + 1X pair out of packet
* 1X CNC swashplate guide (anti rotation bracket)
* 1X V2 CNC tail pitch lever set (bell crank)
* 1X CNC boom mount + hardware
* 1X pair of main shafts (PRO LONG) + 2X out of packet
* 1X CNC see-saw set + hardware
* 1X Tail pitch control set
* 1X Boom supports pack
* 1X Spindle shafts pack
* 1X SD Tail output shaft set + 2X out of packet(Think are straight)
* 1X Tail pitch link set
* 1X Hurricane 200 metal parts pack (opened rest is in parts/extras box)
* 1X Landing gear brace set (white) + hardware
* 1X Long tail rotor belt + 1X out of packet
* 1X H200 Landing gear skids pack + hardware
* 3X Flybars pack (two per a bag) (One opened with 1X flybar in)
* 1X Balls - Extension for CNC swashplate and hardware
* 1X Metal balls-Pack 3.5mm with neck and hardware (opened but still many inside)
* 1X Swashplate guide (anti rotation bracket) + 2X out of packet
* 2X tail servo mount set
* 1X Machine Screws (opened but still many in packet)
* 3X H200SD Crown gear with hardware + 1X out of packet and more hardware
* 2X Tail rotor hubs pack (pair with hardware) (one opened with one hub left)
* 1X Universal links pack (opened)
* 1X Hurricane 200 linkage set (opened)
* 3X Main gears (opened)
* 1X 2 tail boom support set with hardware
* 2X Mast collars pack (L)
* 1X Mast collars pack (S)
* 1X H200SD tail driven shaft with bevel gear
* 1X Damper Rubbers pack (opened)
* Various carbon fins vertical and horizontal
* Loads of V1 tail bits + Carbon tail cases
* 1X CNC tail servo mounts
* 2X plastic reinforced blades balanced and COG balanced (not in packet)
* 1X wooden 3D blades balanced and COG balanced
* 2X wooden 3D blades new in packet
* Loads of spare bits in a box as pictured, always helps out if you loose something etc.
* Hitec servo horns x 6 of two designs(Depends if I sell servos)
* 3X HS-45HB Karbonite gear set (Depends if I sell servos)
SOLD TO PADDY
Laurence
E.G.S.
Hi what about a raffle, I would have a go at that.
Del
Comment