Tweet
Top Spec Gaui Nx4 airframe and Servos,bought second hand from this forum,I fully rebuilt it when I got it with new parts including,swash plate and main bearing mounting blocks and also replaced any bearings that were knackered.
Airframe includes sweet running and powerfull OS37 which has had recent bearing replacement,Hatori 512 exhaust,Formula head and tail upgrade,19T pinion,Clutch bell,engine mount and Hex starter block upgrade.
Alloy tail pushrod guides and alloy tail boom surports holder,recent new clutch and clutch liner gap made smaller to stop premature failure of the clutch.
Hyperion 2100mah Li-Fe,Switch glow pro.
MKS HV9767 x3 and MKS 9780 Tail servo.
Savox Hv 1257 throttle servo.
Radix Mains and Tails.
Spare standard head and tail and some other spares including spare Align 3G mains.
Fusuno Canopy,small hair line cracks near rear mounts and small patch of cracking in top coat near front of canopy.
Run about 4gallons since rebuild,airframe will need nothing doing.
No Flybarless or receiver included.
£460ono.
Airframe includes sweet running and powerfull OS37 which has had recent bearing replacement,Hatori 512 exhaust,Formula head and tail upgrade,19T pinion,Clutch bell,engine mount and Hex starter block upgrade.
Alloy tail pushrod guides and alloy tail boom surports holder,recent new clutch and clutch liner gap made smaller to stop premature failure of the clutch.
Hyperion 2100mah Li-Fe,Switch glow pro.
MKS HV9767 x3 and MKS 9780 Tail servo.
Savox Hv 1257 throttle servo.
Radix Mains and Tails.
Spare standard head and tail and some other spares including spare Align 3G mains.
Fusuno Canopy,small hair line cracks near rear mounts and small patch of cracking in top coat near front of canopy.
Run about 4gallons since rebuild,airframe will need nothing doing.
No Flybarless or receiver included.
£460ono.
Comment