CGY750 + Non SBUS

[Planehazza]

Hey all,

I'm buying a CGY750 to try out. I have a 8ch R6008HS (non SBUS) FASST receiver at present. Will I need to replace that with an SBUS receiver? If so, with a 10C (that does not allow channel reassignment), how will I hook the CGY750 up to an SBUS receiver, but also have a gryphon auto booster running off a PWM channel?

Or should I just buy the Futaba SBUS -> PWM adapter?

Thanks!

[squeaky pete]

just get the 3 channel sbus, u can run the glow off a seperate channel as long as ur tx can handle it of course

[Planehazza]

just get the 3 channel sbus, u can run the glow off a seperate channel as long as ur tx can handle it of course

That's what I mean mate, the PWM channels are 1, 2 and 3, but so are the SBUS channels (aileron, elevator and throttle). The 10C does not allow me to reassign channels numbers. Is there not a way to have the CGY750 look for different channels instead?

[JoeBailey]

With out reassigning the channels there's not allot you can do. A push glo will work fine but the CGY750 will use all 10 channels if you do the 10c mix for the head gains.

Joe

[Planehazza]

Doh, wish I'd known this before lol. Nevermind eh Wonder how much I could sell my 10C for, and get an 8FG instead?

[squeaky pete]

as he said!! i reassigned my thottle to channel7 and made my channel 3 a aux1 so i can use a switch glo other than that my man ur screwed lol get a 8fg and be done with it

[Planehazza]

I would mate, but royally skint If I was confident I could get £200 for my 10C, I'd do it now. As such, it isn't likely