Out of trim

[Guest]

Okey dokey, nearly everytime I go flying I have to re-trim my Spektrum Tx
First flight on every model needs trimming and then fine for as many flights that day
This is the same being them heli's or planks
Last weekend all 2 heli's and 3 planks needed trimming which were very well trimmed on previous outing flights
I had thought it maybe the wind but this made little difference
I have heard something about this with the Spektrums before
Anyone else having to re-trim ???

[robgt]

Mine seems fine...
Have you been flying in normal mode, then idleup - as the trims are set per flight mode?
Just a thought...
If that's not it, it could be a suspect Tx - if you're positive it wasn't the wind/conditions etc?

Then again - if you switch off between flights, and it remembers the settings then, there's no difference between that and last flight one day to first flight next?
Confused
Cheers,
Rob

[Guest]

I've blamed it on the wind until last weekend
So I took 5 models down which were flying in trim previously, and they all needed trimming
They all needed 3 to 5 clicks on most controls
Once trimmed that day they are OK, it's another day they go out of trim

[ChrisB]

Very odd

Mine are always fine