dx6i

[andy_richmond]

round the mother in laws, and no manual
I want to change the expo lower, to make it a tad more sensitive, its on 20, so say 10 ok
if i want to adjust the gyro for that slight tail wag i have i go into the gyro menu??? there is inh or something and something else, what do i have to do to adjust the gain on this???? silly forgetting the book i know

[tiddler]

Go into the gyro menu and turn INH to GYRO
This allocates two settings to channel 5 (the flap gyro switch) One for Rate and one for HH.
Then just set the two % as required.

[andy_richmond]

inh to act is what it does

[brin]

my gyro is set on the gear switch so when i switch on the gear it is in HH and then i use the travel adj to set the gain.

[tiddler]

inh to act is what it does

1st, Are you sure your in the gyro menu
2nd, Is this for your 450 or for Phoenix?

[andy_richmond]

its for the 450, in the main menu, there is dual rate/expo, done that, under that menu heading is gyro. Am i in the wrong place??

[challis349]

I can't remember the dx6, but surely not a sensible idea to try assisting gyro gain away from the heli

[tiddler]

Ahhh, No, your in the right place but I suspect yours is set up the same way as Brins and that's why its showing INH.

[andy_richmond]

it has a tail wag on hh, someone suggested turning it down a bit, i got into the menu, ok,
0 = 50.00
1 = 50.00

same figure, 0 is the hh, maybe 45-48%, it doesnt need much i think

[tiddler]

it has a tail wag on hh, someone suggested turning it down a bit, i got into the menu, ok,
0 = 50.00
1 = 50.00

same figure, 0 is the hh, maybe 45-48%, it doesnt need much i think

Andy, you need to go back and set the gyro menu to INH (See my previous post)

[andy_richmond]

il see what it does for now, i googled an online manual, click on inh, this then allows u to change to act, click on that, you get the gain settings, but i see what your saying, thanks Graham
ive changed the tt gears, lubed it all up, that might help anyway as its all quite stiff and new