DX7 Binding

[Cralis]

Steve got in ahead of you there, Pete. You are 100% right! The heli seems to be right now. Pitch all to pot, and gyro not arming, but the AR7000 and the DX7 are now speaking the same language. I've bound both my Trex450's one, and the one in my Raptor. Both listening to the right model. Happy.

Now, RX positioning in the Raptor. Would the attached photos be OK?

[Boggy]

no craig the ariels should be at right angles to each other turn the small rx 90 deg

[Cralis]

Thanks Ron. Would it be OK to twist the small RX 90 degrees then?

[Cralis]

Also, is it OK that the aerials on the bigger RX are surrounded by spounge?

[Boggy]

i should think so as long as the bands dont interfere with the wires
and yes mine has a sponge cover

[Cralis]

Any idea how to get Aux2 to allow me to set the low end in the EPA screen? On the throttle, for example, I can change the high and low percentages, but it only allows me to change the hi Aux2 setting.

[richieclarkie]

switch the aux 2 switch down when you are in the screen

[Cralis]

Tried that. Cursur just goes to the top %...

[Boggy]

switch the aux 2 switch down when you are in the screen

this is correct craig use the aux2 switch to move between both!!

[richieclarkie]

have you got any mixes enabled