JR9X11 to JRDSX9 MK2

[Red3]

hi all
anybody know if you can transfer settings from a 9x11 to a dsx9 mk2
i have been told this will work if its the old dsx9 but what about the new dsx9 mk2 ?

[Spanner]

I got a DSX 9 and you can transfer settings, you just need a cable I think. I would imagine you could do the same on the Mk 2.........

[Vic.P]

You'll need a trainer lead between the Txs, hold the Enter button and then plug in the trainer lead and repeat on the second Tx and then simply follow the transfer instructions on page 17 of the manual.
The DSX9 software is the same as the 9X11 so there should be no problems.
The DSX9 mk11 just has more model memories and a backlit screen, otherwise it's pretty much the same as the mk1.

[Red3]

thanks chaps i know how its done i want to know if you can do it with the new dsx9 mk2.
thanks anyway.

[hanson]

I did this recently pcm 9x11 to dsx9 mk2, it worked fine.

Rich

[Vic.P]

thanks chaps i know how its done i want to know if you can do it with the new dsx9 mk2.
thanks anyway.

The software is the same in the 9X11, DSX9 mk1 and mk11 txs apart from the exrta model memories, so yes, it will work

[Red3]

I did this recently pcm 9x11 to dsx9 mk2, it worked fine.

Rich

cool thanks for that