Spektrum AR 6200 Battery pin Assignment

[Eddie.Fletch]

Silly question but I dont't want to get it wrong.
I am starting to set up my T-rex 450 servos and instead of using a lipo / Esc want to use 4 NiMH cells as RX power. I have a spare Rx plug but need to know the pin assignments.

The plug on the ESC is (looking at it so you can see the gold connectors):

Black Left
Red Centre
White Right

Am I correct in assuming that:

Black = Ground
Red = + 4.8V
White = Signal

I could put a meter across but i'm sure you guys know the answer.

[Eddie.Fletch]

Waited all afternoon with soldering iron in hand and no replies. So put the multimeter across and got:

Black = Ground
Red = + 6.0V
White = 0V

[Downdraft]

Waited all afternoon with soldering iron in hand and no replies. So put the multimeter across and got:

Black = Ground
Red = + 6.0V
White = 0V

Yes, thats correct. The white cable is the data cable that tells your servo/esc what to do, the black is the negative - and the red is the posative +.

Seems you've been waiting a while for a reply, hope this helps. Oh and BTW 4.8 to 6 volts will be fine.

[bolders]

Also dont forget that if you are plugging in an external supply to the Rx that you have to disconnect power to the Rx from the esc