ar6100e software version

[moyesboy]

I have here a 6100e which says v1.2 on the case.
When I disconnect and reconnect power to the rx, leaving the tx on I don't get any flashing lights.
When disconnecting the rx and reconnecting immediately it takes about a second to reconnect with the tx.
After a lengthy rx only power down it takes 3-4 seconds to reconnect with the tx.
Does this mean its not the latest software?

[jamesb72]

Sounds like this needs updating, latest quick connect firmware is v1.6 - if you post yours back to Horizon UK they will update it for you at no charge, but they don't seem to add a v1.6 sticker, so you will need to mark it as updated so you don't forget.

[asomaro]

Sounds like this needs updating, latest quick connect firmware is v1.6 - if you post yours back to Horizon UK they will update it for you at no charge, but they don't seem to add a v1.6 sticker, so you will need to mark it as updated so you don't forget.

Mine was the old 1.2 version which I've flown for quite a while, just sent it to horizon because I lost an antenna in a recent fight with gravity (which I lost). Should come back repaired and with 1.6 update.

cheers