spectrum help for newbie

[jaspar]

Hi all wise ones

I am in the middle off installing my ar2000 rx to my new trex450 and nowhere in the manual does it tell the polarity of the servo plugs.
they can be plugged in both ways. I have savox servo's with brown / red/ orange plug so which way round do they plug in.

[chugga-bug]

No harm will be done if they go in wrong. But they will only work when correct. There is a diagram on the servo casing, but just try it one way or another.

[sacko]

Which Rx is it? Typo?

On the AR7000 the shape of the servo plug is cut out.

[glen_j]

the orange wire goes towards the ariel end of the rx as it is the signal wire the brown is negative and the red positive there should be a diagram on the rx casing near the plugs

[jaspar]

opps typo

rx is ar6200

no diagram on rx exept label showing which ch is which

thanks chuga and glen

[scallybert]

rx is ar6200

no diagram on rx exept label showing which ch is which

Weird - It says on the one in front of me.

With AUX1 at top, and BATT/BIND at bottom; signal is left, ground is right.

Make sure you have QC firmware (V1.6 or above.) This gives some warning and tolerance of static & power issues. Either of which can be a big problem.