Spektrum Ar6100E

[Grant85]

I have the Ar6100E receiver in my Blade 400 which came with the model as standard.But now when i connect my battery to the Esc to arm the heli the receiver flashes so i unplug the battery and connect again,now the amber light on the receiver is constant but the red led on my Gy401 gyro flashes,so all i do is flick my gyro switch on my transmitter up and down 3 times to reset the gyro and now the gyro led is constant aswell as the receiver light being constant,So what is the problem here? what does the flashing amber light on the receiver mean? any help is much appreciated.
Cheers Grant

[robgt]

It usually means that you have cycled the power to the receiver but not the transmitter.
It is there to give you an indication if the power to the receiver fails in flight, then comes back on... at the end of the flight, the receiver would be flashing.

You'd also probably have a steaming pile of bits to pick up too - which is a slightly better indicator that you lost power

LOL
Cheers,
Rob

[Grant85]

I think i know what is happening,When i remove my lipo after a flight then i connect my new lipo the receiver thinks it lost power then regained it because my transmitter is still turned on,so what i will do everytime i change my lipo is turn my transmitter off.Then i will turn it back on and connect the lipo to the esc.
Cheers Grant

[Si Goodchild]

Yep, that's it.