Attention All Twister3D Pilots

[Twister3D]

Twister 3D and similar size helis only please.

Please can you all enter your Pitch and Throttle curves here, and brief description why. really want to get mine set up for more advanced flying,
and a nice comparison on here would be great.

Thanks Dudes n Dudesses

Twister

PS: I only have a horrible 6 channel TX at mo so only got the usual
5 settings
But do have an Idel Up channel with pitch and throttle curves

[Disc]

Okay,

Now I am at work but basically my Pitch is about the same
as normal mode. But with a bit more negiative you need -6 to
hover inerted and to loop nicely.

idle up 1 though I put about 10 on everything from middle up
and everything below matchs the same as the top 2 points on the
Throttle cure. The power makes it hover so much more stable.

point--Throttle
5 ---- 100
4 ----80
3 ----70
2 ----80
1 ----100


I fly in about 10mph winds in idle up 1 and it moves so well but:

Er mine still awaits a rebuild after it went in hard!!!!!!!!

[Leebert]

Hi
I have borrowed a T rex 450 SE and the throttle curves that were programmed into my Futaba T7C are..

Normal:
100
75
50
25
0

Idle up:
100
90
80
90
100

Pitch is 0 to 100 in both modes.

Cheers,

[Disc]

Leebert,

My T-rex is about the same as yours apart from my idle up1
has neg pitch so it will loop or hover inverted not that I can
hover inverted yet.

neg pitch -5 to -8 is good idea for idle up 1

what I like to do with the Trex is say 10mph winds
power it high into wind then back off in normal mode with -2ish
pitch it can be made to slowly sink on little power so much fun.