Reverse servo option on DX7

[Guest]

I have followed the instructions but I do not get the "Reverse SW" option when scrolling though...can anyone advise?
I have bound my CX2 to it so far but everything but the throttle is reversed.

Cheers
Jack

[Guest]

Anyone?

[Si Goodchild]

Yep, go into the menu pages (left hand down switch and select together) and then scroll through the pages. It's a single screen with simulated dip switches. Should be fairly self explanatory from there, but shout if it's a problem and I'll look at mine when I get home.

[machasm]

Do you know how to access the menu?
Press the down and select buttons after you have accessed the model you want to edit.
Once in the menu press the down button to scroll through the menu and you should find a [reversing sw] menu.

[Guest]

Yup, have got in to the menu many times now. Down of the left and select held together whilst switching on - then I use the left hand up and down to scroll through. I have used this menu to rename the helis for model1 and 2.

I get:

[Model Select]
[Model Name]
[Select Type]
[Model Reset]
[Trainer]
[Thro Recovery]
[Input Select]
[Swash Type]

[Guest]

Numpty alert!!! I was doing it by holding the down and select then switching on - just tried it with it already on and of course it works...sorry for the waste of bandwidth caused by absolutely numptiness!

[zoombolt]

Numpty alert!!! I was doing it by holding the down and select then switching on - just tried it with it already on and of course it works...sorry for the waste of bandwidth caused by absolutely numptiness!

At least it's working now Jack...
You had a spool up with the T3DS Yet?

[Guest]

At least it's working now Jack...
You had a spool up with the T3DS Yet?

Not yet...have been a little busy. Hopefully this weekend I will. I am working my way through the TX manual at the mo though - its fairly long...