dx 6i

[j42]

hi I have a spektrum dx6i can anyone tell me how to set a head hold gyro up
as when I flick the switch to go in to HH mode theres no difference to normal rate mode.
any help please

[TrexMADuk]

ok what gyro have you to start with?

[j42]

ok what gyro have you to start with?

Hi I have set it all up similar to how it was when I used a sanwa rd TX on that radio in the gyro settings the gain goes from -125 to +125 if you set the gain at say -50 its in rate mode and if you set it at +50 its in head hold mode.
but on the spektrum the gain just goes from 0 to 125 and where ever I set it it just increses the gain in rate mode.
I cant get it into head hold mode when I flick the switch its stays in rate mode

the gyro is a align HH one not sure of the number

[steelie600]

if its in gyro mode below 50% is rate and above is hh. if this is wrong gyro sense channel may need reversing

[j42]

if its in gyro mode below 50% is rate and above is hh. if this is wrong gyro sense channel may need reversing

hi the way I have the switch set at the moment is switch up 40% and switch down 80% but it stays in rate mode in each position

[brin]

mine is set as yours if you move the switch up the arrow shows 0. and the switch down shows 1 so bellow 50 your are on rate and above 50 you are on hh

[Smoothound]

hi the way I have the switch set at the moment is switch up 40% and switch down 80% but it stays in rate mode in each position

One of these settings needs to be below 50% which it is

50% is centre

I don't know your gyro or radio but chances are you need to increase the 80% or reduce the 40% setting.

Guessing again it's the 40% that needs setting nearer 20%

[j42]

ok thanks for the help it seems to be working ok now.
on the transmitter in the settings the travel adjust settings you can adjust the end points for gyro what does it do