Tweet
Hey guys, my DX7 throttle stick bushings are finally giving some play, I've been using it everyday for quite some time now, even on the sim.
Noticed the throttle stick felt sloppy, something not right. Thought it was the tensioner plate but checked it and still lots of grease on it and the fuel tube looked fine. Looked at the axle going into the bushing and yep, some play.
I've rotated the brass bushings and greased them for now which seems to have made them better, but it's only temporary.
Looking to get this set of bearings here:
http://www.readyheli.com/Ready_Heli_..._p/bb4x7x2.htm
What grease do I need for them and how do you have to apply it? There's a special bearing greaser tool but do I really need it?
Thank you.
Noticed the throttle stick felt sloppy, something not right. Thought it was the tensioner plate but checked it and still lots of grease on it and the fuel tube looked fine. Looked at the axle going into the bushing and yep, some play.
I've rotated the brass bushings and greased them for now which seems to have made them better, but it's only temporary.
Looking to get this set of bearings here:
http://www.readyheli.com/Ready_Heli_..._p/bb4x7x2.htm
What grease do I need for them and how do you have to apply it? There's a special bearing greaser tool but do I really need it?
Thank you.
Brian
Comment