DX6i Gyro Setting

[Caravan9927]

I have just flown my new Trex 450 for the first time and am having problems with the gyro. It works fine in non heading hold but am getting no response in HH mode.

I am sure it is down to the fact that I don't understand the settings in the Spectrum DX6i radio under GYRO. I understand the gain figures 0 and 1 under the RATE heading and have entered 60 / 40 respectively but I don't understand the settings under SW-GYRO. It has two options INN or F MODE. Assuming I need F MODE there are further options to enter amounts for NORMAL and STUNT. I am not into STUNT (yet) so should I be entering any amounts in the NORMAL mode and if so what or should I be leaving everything on INN.

Sorry to be such a dumbo but I just don't understand that part of the setup and would appreciate some advice please.

[JaseTT]

Had a similar problem with my DX6i/Mini Titan combo - re-read the manuals 100 times and realised I had to re-bind with it in HH switch position - try that!

[Caravan9927]

Thanks JaseTT I'll give that a try tomorrow but in the meantime, do you know if I have to enter any settings under the SW-GYRO NORMAL heading?