Tweet
http://runryder.com/helicopter/t419049p1/
Interesting thread...plenty of piccys....some good DSM2 stuff just round the corner..this is capable of running direct from a 2S lipo with in built regs for tail/Gyro/in-built Governer etc..NO MAGNET especially for Ian!!!
be a very light setup
Heres a little taster from it..below
It was Danny's Szabo's Aurora at the Las Vegas Funfly last weekend. I was there and a Mike Fortin from readyheli told me that the 7100 was a 3 in 1 unit: receiver, regulator and limiter/governor. It is sure a great unit and I will buy one as soon as it comes out!
The sensor for the govenor is a hall effect sensor that mounts on the backplate. No magnets. (Finally) He said it should be out this summer. It has two regulators built in. One for the tailrotor servo and one for the aux channel for the tail gain. You can run the rest of your system on 7.4
Interesting thread...plenty of piccys....some good DSM2 stuff just round the corner..this is capable of running direct from a 2S lipo with in built regs for tail/Gyro/in-built Governer etc..NO MAGNET especially for Ian!!!
be a very light setup
Heres a little taster from it..below
It was Danny's Szabo's Aurora at the Las Vegas Funfly last weekend. I was there and a Mike Fortin from readyheli told me that the 7100 was a 3 in 1 unit: receiver, regulator and limiter/governor. It is sure a great unit and I will buy one as soon as it comes out!
The sensor for the govenor is a hall effect sensor that mounts on the backplate. No magnets. (Finally) He said it should be out this summer. It has two regulators built in. One for the tailrotor servo and one for the aux channel for the tail gain. You can run the rest of your system on 7.4
