Spektrum , initialise problems

Recently changed to spektrum 2.4ghz , When my models boot up lights on both RX and the satalite rx flash and go steady,

But on my logo one go's steady and the satalite keeps flashing , range test all appears to be fine with no problems, anybody now how i can sstop it flashing? is it faulty?

Thanks in advance

Andy

[Tim Procter]

It needs Re-Binding Andy.

[Blackrat]

ive got the exact same problem on my logo 14 , problem is the Rx is tucked away so i gotta yank its guts out to stick a bind plug in :S

is does bind though, if you leave it for about 5-10 mins after your first try .. does my nut, one day ill rebind it

[guest222]

Have Re bound it but still has same problem wondering if the 6s pack is to high voltage for it? I plug in a 3s and it works every time!!! Im using a kontronic jazz 80-6-18 esc with the BEC so no seperate rx battery

Andy

[guest222]

After a bit of fault finding ive narrowed it down the problem to the satalite receiver!! Leeds models are going to replace it (v good of them).

question is now was it a factory fault or did i do somthing to it? could running the rx with the bec cld it have thrown to many volts up it? (6s lipo runs both motor and the rx)

Andy

[glen_j]

i had a faulty ar7000 receiver that did the same and wouldn't bind when i bought it. turned out to be the receiver though so yes can be a factory fault