Spektrum dx7s and spartan quark

[BASS 666]

anyone using a dx7s with a quark ? i have a couple of questions....

[super]

have done in the past....

[brummycraig]

yes. fire away

[BASS 666]

have done in the past....

i need the radio settings mate cause im having a bit of bother and i know its the settings but cant put my finger on it..

[BASS 666]

yes. fire away

can you tell me your radio settings in your gyro menu..

[super]

Ahh, i have over written them now I'm afraid. Cant help you there. Whats your issue? seem to remember it was very simple to setup.

cheers

John

[brummycraig]

Spektrum dx7s and spartan quark

I have gyro settings
Pos 0 40%
Pos 1 37.5%
Pos 2 -40%

Chanel Gear
Switch gyro

Hope that helps?

Ps. I Don't use pos 2 rate mode, never set it up

[BASS 666]

Ahh, i have over written them now I'm afraid. Cant help you there. Whats your issue? seem to remember it was very simple to setup.

cheers

John

i set it up and it worked fin then i turned my heli off and on and i had red and blue lights flashing telling me it was calibrating and thats the way it stayed.

[BASS 666]

I have gyro settings
Pos 0 40%
Pos 1 37.5%
Pos 2 -40%

Chanel Gear
Switch gyro

Hope that helps?

Ps. I Don't use pos 2 rate mode, never set it up

i have tried those settings and my servo doesnt center..

[trillian]

I have several Spartan 760s that I am using with a DX7 (not the 7s) so the gain values might be different.

[brummycraig]

Spektrum dx7s and spartan quark

Have they got u past the blue/red flashing lights?

[BASS 666]

Have they got u past the blue/red flashing lights?

my tail blades move but the servo doesnt center..

[brummycraig]

Spektrum dx7s and spartan quark

It won't return to centre in heading hold mode but it should centre on initialisation. Try switch pos 2 with those settings. Rate mode should centre the servo.
Make sure u have no trim or sub trim on the rudder Chanel

[BASS 666]

It won't return to centre in heading hold mode but it should centre on initialisation. Try switch pos 2 with those settings. Rate mode should centre the servo.
Make sure u have no trim or sub trim on the rudder Chanel

thats the problem i havnt asigned a switch to switch between hh and avs cause i dont know how to..

[brummycraig]

Spektrum dx7s and spartan quark

If u use my settings pos 2 u will see is -40% which should be rate mode. The other 2 are HH