Announcement

Collapse
No announcement yet.

Aerispire Multigov Pro?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Aerispire Multigov Pro?

    Does anyone know if these are still available over here? If not I may just have to get a straight from aerspire.

    Are there any decent alternatives to these?

    I currently have a Throttle jockey pro along with a csm carb smart in my 700N.
    But once I get a raptor x50T Nitro I'd like to use 2 of these if nothing else it will simplify the wiring and from what I've read they do work well.
    Infact if I get my Robbe Cuatro going again I'll need 3 :-D
    The man that has never crashed a heli has never flown a heli.


    Lewis McIntosh

  • #2
    i use one on my 700le, afaik FL sell them still.


    sigpic
    x 1

    Comment


    • #3
      I've got two with the programme card that I might be talked into selling

      Comment


      • #4
        I also have one spare, fantastic governors and so simple to setup.

        PM me if you're interested.

        Cheers

        Gavin
        Gavin
        • Thunder Tiger Raptor G4 FBL - OS105 HZ-R, Bavarian Demon 3SX, MKS HBL HV Servos, Reactor HVX, Optifuel SLV 25%
        • Thunder Tiger Raptor E720 FBL. Bavarian Demon 3X, (Under Construction)
        • Gaui X7 - (Under Construction)
        • Synergy N5CTT - OS55 HZ-R, Bavarian Demon 3X, (Under Construction)
        • Gaui X5 Formula - XNova 4025-1100, Castle Talon 120HV ESC, Bavarian Demon 3X, MKS BLS Servos, Spin Black Belts, Optipower 6S 4300's
        • KDS Agile 5.5 - XNova 4025-1100 Motor, Castle Talon 120HV ESC, Rail 556's, Optipower 6S 5000 Ultras
        • JR Vibe 50 FBL Nitro (Retired!)


        Optifuel * Bavarian Demon * MKS Servo Tech * Optipower

        sigpic


        http://www.kaos-rc.co.uk

        Comment


        • #5
          I wouldn't use anything else f/l normally do them. Alternativly buy direct, excellent service from them.

          Comment


          • #6
            Just out of curiousity, what makes them so good (if you don't want the mix control) ? Currently I have several CSM revlocks and have used the TJpro and GV-1. The GV-1 is the only one that can be programmed to run three different headspeeds from the flight mode switch on the DX-7, with the TJ or Revlock an elaborate series of programmable mixes in the TX is required to get them to operate automatically (with a DX7).
            Kasama, Minicopter, Henseleit, JR, Shape, Beam
            Robbe, RMJ Raptor gasser, powered by
            Spartan, Spirit, BeastX, Kontronik, CY Total-G, DX8

            member of Epsom Downs and Bloobird clubs
            Proud recipient of 7 EGS! and a platinum star

            Comment


            • #7
              It is easy to set up, you can have different head speeds, you can use it as a gov or limiter and it works extremely well. It's small and much easier to use than a GV-1 futaba make good stuff but their manuals are full of fail.

              Comment


              • #8
                I read quite a bit about them and at the time decided they were the best option for me but never got around to buying one. I'm not going flybarless yet so not going that route.

                I've heard the csm ones are good but as with everything csm they need quite a bit of tinkering to get spot on. Btw I do like csm but the aerspire multigov has all I want in one package.

                Also the throttle jockey pro's are still really good if only they had a governor and a limiter in one wee box along with a mixture control.
                The man that has never crashed a heli has never flown a heli.


                Lewis McIntosh

                Comment


                • #9
                  Originally posted by Sao View Post
                  I've got two with the programme card that I might be talked into selling
                  Originally posted by gmurrell View Post
                  I also have one spare, fantastic governors and so simple to setup.

                  PM me if you're interested.

                  Cheers

                  Gavin
                  PM's sent chaps :-D
                  The man that has never crashed a heli has never flown a heli.


                  Lewis McIntosh

                  Comment

                  Working...
                  X