Tweet
I'm just finishing my Knight 3D and need recommendations on a digital throttle servo. I have a CY ATG installed and am using a OS50 hyper and will be installing a CSM smartcarb when in stock.
Cheers
Justin
Cheers
Justin
-
3152 will do its not a major load on itOriginally posted by shuglu View Post -
I have seen that some are using micro servos in the switch position on a 3D and then using the empty throttle servo position for a front tail servo conversion. Are micro servos reliable in this application?
JustinComment
-
They are, as there is no load associated with moving the throttle armOriginally posted by shuglu View PostRaptor 50 V3 Titan
OS 50 hyper-MP2 pipe-9252-401 & 9254-Rev Max-Radix600-Radix 95- Kasama Head
Trex 600N Pro R.I.P
OS 50 Hyper-MP5-9451-611 & 9256-RevLock 20-CycLock-Radix600-Align Tail Blades
Knight 3D
OS 50 Hyper-MP5 Pipe-9255-Logictech 6100-Rev Lock 20-Radix600-Radix 95
Trex SEV2
4S TP 2000-Medusa 28-40-3400 Jazz 40-6-18-GY401 & 9650-HS65MG
Comment
-
As long as the carb arm is undamaged/unclogged etc and moves freely. If you get a stiff carb, the servo wants to be good
Just a thought...
Cheers,
RobTeam Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo
| 3D ChampionshipComment
Comment