Phoenixtech GT9 Gyro

[evergreek]

Hello all,

For the Phoenix GT9 gyro, Iam having problems with the tail servo binding in one direction.. i have tried multiple times to set the limits within the gyro, but when I go back. it keeps on binding in the same direction.. Any ideas? Thanks!

[Lynx.1677]

Best bet is to speak to Andy at Phoenixtechuk. I'm sure he'll be able to advise.

[evergreek]

Quick question... on the Phoenixtech ESC there is a plastic shrink wrap.. do i need to remove this prior to installation?

[simm0]

hi
you must exit the menu before you switch off,after setting the end point hold the rudder stick for at least 3 seconds to exit the menu.or it wont store the setting.
im sure this is correct but i will check today myself and hope this helps.
As for the speed control,leave the shrink rap on

cheers stefan/craig