gain values on 611 with a dx7

[Supercaptaincrash]

currently have my gy 611 set up with my dx7! have it setup on the gear switch changing from h/h/rate can anyone say what a ball park figure is on the 611 screen gain wise! i can alter gain + - via travel adjust but struggling to find a happy medium!

[Tom Burgess]

34 -40 is usually right in the sweet spot on the screen on a 611. A is heading hold and N is rate

[Red3]

hi have a look at Jason Krause's JKheli.com he has a spot on setup for the 611 its the one i used for my 611 until i sold it hope it helps

[paul35]

I followed this set up! and had no problems

http://www.rchelisite.com/how_to_set...gy611_gyro.php

[Supercaptaincrash]

Thanks for that tom hit the nail on the head there! the screen was showing values in both rate and h/h high in the 90,s! didnt think nothing of it till i got it into the hover and the heli was shaking and vibrating all over the show! played about a little with travel adjust and have them both at 34 now and the shaking has stopped!

[Supercaptaincrash]

34 -40 is usually right in the sweet spot on the screen on a 611. A is heading hold and N is rate

Tom, should i be setting both the same?

[Tom Burgess]

Tom, should i be setting both the same?

I did mate, never went into rate though so it may need some tweaking if you do.

[callum]

I set my gain to 37 and forget about it

[Supercaptaincrash]

wouldnt of expected the whole heli to act like it did when the values were high up!