Which Governor?

[Planehazza]

Hey all,

Which gov should I get? I just use a G600 on my 600N, and tbh it has always worked fine. Should I just stick to what I know, or try a revlock 10 or something?

Its going on a Vision50 Comp with an OS50 Hyper.

Cheers!

[sacko]

I use the Revlocks and like them.

[Planehazza]

I use the Revlocks and like them.

Easy enough to set up?

Revlock 10 or 20?

Thanks!

[sacko]

Very easy once you know I suppose, not as easy as the Align one imo.

RL10 is more than adequate.

[Mike W]

Revlocks here as well .. plus you dont need a tacho to set the headspeed on them either ...

[thomas_600le]

i personally would say the multigov pro, i dont think it could be any easier to setup.

[Hellski]

Rev lock 10 & 20 are very easy to setup using the table supplied, like the align. I've used both the CSM & align, both do what they say on the tin so if your used to the align, stick with what you know.

[lex7919]

I tried that gov on mine Harry and never had much luck with it tbh, Part of the issue i was informed is due to the different gear ratio of the Comp to a 600 not so sure how accurate this info was? One gripe was the overspeeding which is way more obvious on the Comp using this Gov compared to using it on a 600.
I have always wanted to try the Revlock now i'm stocking CSM products i want to try one even more, It will be my next purchase for sure. I like the programability of the CSM and the functions it has. But i have heard people say that they are very good buty do take more setting up having studied the instructions they come with i would agree but see nothing thats going to be really difficult to set up providing the steps are followed.
Another good Gov is the Curtis Youngblood one ATG Govenor if a little pricey.

[Planehazza]

Cool thanks all. I'm tempted to give the revlock a go also. Do they come with magnets and sensor?

[Hellski]

Yes mate & mounting brackets, sticky pad, heat shrink & screwdriver! If fitting to align you will need the N9 bracket.

[lex7919]

Yes they come with magnets sensor extension leads and fitting brackets (which you need on the comp)

[max2741]

Just fitted and setup a Revlock 10 tonight found it very easy and also can be used on a 6 channel, weather permitting will test it tomorow.

[lex7919]

you can use the bracket supplied for the comp just need to file it slightly

[Planehazza]

Bracket for the comp? I must have overlooked this in my kit?

[coptermanic]

MultiGov Pro works well with both my OS50 and TT 53. Easy to set-up and adjust.