CSM cyclock

[Ade_Law]

http://www.rcmodels.org/csm/cyclock1.htm

very interesting. shows some serious benefits even without going flybarless

Ade

[Jamez]

Try telling that to Edders.....

[Ade_Law]

the theory of the control resolution definitly holds water. Theres a noticeable difference from 512 bit, 1024 and 2048 res so the 512 resolution they are talking about even on a 2048 system is going to make a massive difference to the feel and accuracy.

The cyclic - collective interaction you get at high/low pitch angles is definitly something worth fixing too

Colin is a very very clever man no doubt there we just dont see eye to eye on gyros :-)

the rev-lock is excellent no reason the cyclock shouldnt be either. The trouble with 3dmasters is that you need 2 models so you need 2 of everything. So if i was to try this and like it i would need 2 of em!

Ade

[ChrisB]

Dont try it!!!!

I think the theory is OK but we are talking mere fractions of a fraction of a bit of a second here

I twiddle my sticks and the swashplate moves accordingly

Job Done

[Edders]

Ive been running the cycloc for a while now and love the fact you can set up your heli with better acuracy than the transmitter allows you can adjust for the speed of servos, phase errors, ccpm interactions and you get increased accuracy

[Ade_Law]

chris if we all thought like that then we would still hunting bears for food and living in caves

Ade

[richieclarkie]

Ade you should have told him there was a video of it but it hasn't been released yet.

Would have made all the difference

[trvo]

Just ordered one, I asked nicely for a couple of 720's with it but they are in short supply (for loaning not sale) so I'll see what turns up...

Hoping this will get rid of my laggy channel 6 servo (gotta love Futaba), they are confident it will...

Trev

[jimbob]

No opinons allowed Chris! Except mine - I know you know that already 'cos I've told you before! Now put that lip back where it belongs

[ChrisB]

Just ordered one, I asked nicely for a couple of 720's with it but they are in short supply (for loaning not sale) so I'll see what turns up...

Hoping this will get rid of my laggy channel 6 servo (gotta love Futaba), they are confident it will...

Trev

Apparently Spektrum have dealt with any lag issues with the DX7,read it in the instructions but i dunno whether its true or not

[jimbob]

He He
Wouldnt disagree with you Jim as i know you are right

Good man

[trvo]

Yes, it's true...Dx7 has altered the xmission order and sends all the data in one stream for the ccpm servos.

Trev

[richieclarkie]

I appear not to be able to take the **** on this forum... very sorry won't do it again.

[ChrisB]

Yes, it's true...Dx7 has altered the xmission order and sends all the data in one stream for the ccpm servos.

Trev

I wonder how this compares to what the Cyclock is doing?

[trvo]

Could be interesting, non-dx7 tx's don't hold the resolution during the full stick movement, I have no idea if the dx7 does or not...

Trev