Tweet
Hi all i'am having some probs with my gov. Had it in a sceadu and worked well. Now in my velo and it takes an age to kick-in but once it has it will go in and out ok. Using a 650 on throttle and have curves in place.
-
Oxy4+, tgy servos, hw60a, spirit fbl on 6s 🤓
sigpic - Team pilot -
In my experience the governor will only "kick" in when the the throttle stick is at 25% or more and the engine revs are within 60 or 70% of the target governed rpm.
When I startup my model for the first time it also takes a little while for the governor to kick in but once the engine is upto speed and warmed up it all works without any actual problems. -
get a proper govener,lolChris 'CHUNK' Newby
Trex 700E DFC_Align BL800MX_CC160HV_BL700H_BL750H_Spartan VX1n_Haiyin 5000mAh 12s
Trex 700E DFC_Align BL800MX_CC160HV_BL700H_BL750H_Spartan VX1n_Haiyin 5000mAh 12s
NAHC-Newton Abbot Heli Club, check out the website at WWW.NAheliclub.org.uk
ALIGN-TREX.CO.UK team pilot
LYNX team pilot
SPARTAN team pilot
Dx18Comment
-
Is your engine tuned so that it can give you the target rpm, I had the same issue with my 600 when I fitted a TT53, it was far too rich and couldn't give me the 2060 I was trying to get, hence the governor coming in and outComment
Comment