Looking to buy sevo set

[fmiguelms]

I need tips on buying a heli 60 servo set,
Witch one you advise, brand Futaba (it's the easyest to buy here in PT)

Ciclic?
Rudder?
Engine?

Cheers

[Stuart]

Which .60 heli is it, if you buying a for a CCPM setup you best with digital purely for precision as the cyclic demand perfect positioning. However, you can get away with S9206's (Futaba).

I have S9252 (futaba's) on my Fury Extreme.

For rudder its dependant partly on the gyro you get, if its a GY401 then the preferred if the S9253 (digital), while the GY601 has a recommended servo of the S9251 servo. Digital servos are high speed and for the tail this will give precision tail holding and for a Heading Hold gyros this is required. This is not to say that you can't use a NON digital servo on tail the key is speed. Decide on the Gyro first then explore your options on tail servo's.

I use a Hitec 525BB on my throttle, torque isn't a major factor as its only working on the throttle but it does give a good speed, thus ensuring that the throttle isn't lagging too far behind on the pitch. However, if you have a GV-1 (Govenor), a reasonably fast servo is worthwhile as the GV-1 is constantly working on the throttle to ensure a fixed headspeed.

I hope this helps you.